Tripp Lite B072-008-IP, B072-016-IP, B070-016-19-IP, B070-008-19-IP owner manual Users

Page 22

2..Web Configuration Interface

•Obtain DNS Server Address Automatically – When the DHCP mode checkbox is checked, this checkbox is also checked. When the Stateless or Static mode checkboxes are checked, this checkbox is deactivated, and you must manually enter a DNS Server address.

•DNS Server – When in DHCP mode, check the checkbox next to DNS Server to manually assign its address. When the

Stateless or Static mode checkboxes are checked, the Obtain DNS Server Address Automatically checkbox is deactivated, and you must manually enter a DNS Server address. Enter a DNS Server address appropriate for your network.

•After making any changes to the KVM’s LAN settings, click on the Save button at the top of the screen to save them. Upon clicking Save, you will be prompted to reboot the KVM to finish implementation of the new Device settings.

Click Yes to proceed.

Configuring the SNMP settings:

This section of the Device tab allows you to configure the KVM so that notifications can be sent to a SNMP server when a LAN port fails. Upon receiving notification of the failure, LAN redundancy is enabled. Note: If both LANs fail, a message cannot be sent to the SNMP server.

•Trap Recipient Address – The Trap Recipient Address section provides three types of addresses that you can enter for the SNMP server that you want traps to be sent to: IPv4, IPv6, and Host. Check the checkbox of the type of address you wish to enter, and then enter in the address that corresponds to your SNMP server.

•Community – In this field, type in the SNMP write community string to be used for authentication of messages sent between the KVM and the SNMP server.

•After making any changes to the KVM’s SNMP settings, click on the Save button at the top of the screen to save them. Upon clicking Save, you will be prompted to reboot the KVM to finish implementation of the new Device settings.

Click Yes to proceed.

2..4..5 Users

The Users tab in the Configuration section allows administrators to Add, Edit, and Delete accounts on the KVM. Up to 256 accounts can be added, with any combination of Administrators and Users. The following section describes this page, and how to configure accounts.

There are two levels of user access:

•Administrator – Has unrestricted access to all windows and settings, and can change the name and password of all users.

•User – Can access and control Target Servers that they are given access to by an administrator. Users cannot access the Configure or Events sections of the Web Configuration Interface, nor can they disconnect remote sessions. When in a remote session, they are not allowed to access the power management functionality.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents NetCommander IP Cat5 KVM Switch Table of Contents Legal Notice Features and BenefitsProduct Overview Target Server Compatibility SafetyTerminology Client Computer CompatibilitySystem Components NetCommander IP Unit Console KVM Switch Front ViewConsole KVM Switch Rear View Rackmount KVM Switch Front ViewStandard Console KVM Switch Instructions Rackmounting the NetCommander IPRackmount KVM Switch Rear View 2 2-Post Rack Console KVM Switch InstructionsConnecting the System Initial Settings Default IP AddressTo set the IPv4 address via the local console OSD To set the IP address via the Web Configuration InterfaceTo set the IPv6 address via the local console OSD Product Overview Product Overview Web Configuration Interface Logging Into the Web Configuration InterfaceWeb Configuration Interface Layout ToolbarServer available for access My Targets SectionConfiguration Section Server StatusFirmware Upgrade To perform a firmware upgrade, follow these stepsWeb Configuration Interface Backup/Restore To back up dataTo install an SSL Certificate To restore dataSSL Certificate Configuring the Device ID settings DeviceUsers To add an account To edit an accountTo delete a User Switch ConfigurationTo edit a port name User Targets To configure User TargetsPower Devices To Add a PDUTo Edit an existing PDU To Delete a PDUPower Outlets To configure the power outletsSerial Ports To configure the serial port settingsTo configure the security settings SecurityAccount Blocking section Authentication Web Configuration Interface Basic, User, and Group Sample Permission String To change the password Password SectionTo configure the date and time Date & TimeTo reload the Events Log Events SectionTo view the Events Log To clear the Events LogStarting a Remote Session Conducting a Remote SessionTo start a remote session Session Remote Session ToolbarPin Toolbar To mount the ISO as virtual mediaTo unmount an ISO file To set the session profileVideo To manually adjust the video settings PowerKeys To add a keyboard sequenceTo edit a predefined keyboard sequence To record a keyboard sequenceTo delete a keyboard sequence To set the Mouse Settings mode MouseConducting a Remote Session To calibrate the mouse pointers To align the mouse pointersMouse Synchronization and Keyboard/Mouse Response Time Tips Server/Serial Shared SessionExclusive Session Full ScreenLocal Console Tuning F5Move Label F1 F2 Setting Power ManagementTo Power Manage a computer To set the IPv4 address via the local console OSD To change the keyboard language Changing the HotkeyInputing and Updating DDC Information Serial Port Pinout Browser SecuritySecurity Certificate Installation Security Certificate Installation Java Security Security Certificate Installation Security Certificate Installation Technical Specifications Chrome browsers Max ResolutionVideo Resolution and Refresh Rates Warranty and Warranty Registration
Related manuals
Manual 90 pages 26.84 Kb Manual 1 pages 43.68 Kb

B070-008-19-IP, B072-008-IP, B070-016-19-IP, B072-016-IP specifications

The Tripp Lite B070-016-19-IP is a highly versatile 16-port KVM switch that serves as a reliable solution for managing multiple servers or computers from a single set of keyboard, video monitor, and mouse. This device is particularly useful in data centers, server rooms, and other environments where space and efficient management are crucial.

One of the standout features of the B070-016-19-IP is its ability to support remote access. With built-in IP capabilities, administrators can manage connected devices from anywhere in the world, enhancing operational efficiency. This is particularly important in today's increasingly mobile work environments, where remote troubleshooting and management can save time and resources.

The switch supports a variety of video resolutions up to 1920 x 1200, which ensures sharp and clear visual output, making it suitable for high-definition applications. Additionally, it is compatible with all major operating systems, further ensuring versatility in a multi-platform environment. The B070-016-19-IP features a compact design that can be easily integrated into existing systems without requiring significant reconfiguration.

The device employs advanced security measures for remote access, including enhanced encryption to protect sensitive data and server access. This includes features such as user authentication and various access levels, ensuring that only authorized personnel can manage the systems.

Built for durability and reliability, the Tripp Lite B070-016-19-IP is designed with robust construction that can withstand the rigors of daily operation in demanding environments. The device also includes a built-in firmware upgrade capability, keeping it up to date with the latest advancements and features.

In terms of connectivity, the switch offers multiple interfaces, allowing for seamless integration with various hardware configurations. It utilizes standard RJ-45 ports for connection, making installation straightforward and efficient.

Overall, the Tripp Lite B070-016-19-IP KVM switch stands out for its powerful blend of features, flexibility, and security, making it an ideal choice for IT professionals who require efficient management of multiple servers or computers. Whether used in a data center or an office, this KVM switch provides the tools necessary for effective system administration and optimal resource utilization.
Top Page Image Contents