Tripp Lite B070-008-19-IP Console KVM Switch Rear View, Rackmount KVM Switch Front View

Page 7

1.. Product Overview

Console KVM Switch Rear View

3

4

6

RESET

1

2

5

1Power Outlet – The power cord included with the console connects to the unit here.

2Reset Button – Pressing this button for 10 seconds restores the system to its factory default settings.

3Serial Ports 1 and 2 – The KVM features two RJ45 serial ports for connecting serial manageable devices, such as PDUs, firewalls, and routers (see the Serial Pinout section in this manual for the pinout information).

4LAN Ports 1 and 2 – The KVM features two RJ45 LAN ports for connecting to 10/100 Mbps networks. If LAN 1 goes down, LAN 2 takes over. When LAN 1 becomes operational again, the KVM will need to be rebooted to make it the default LAN port again. Note: Only one LAN port can be turned on at a time; they cannot both be turned on. If you don’t wish to use network redundancy, connect a single network cable to the LAN 2 Port.

5USB Port – This port currently serves no functional purpose. It is included for future functionality upgrades.

6Server Ports – When connecting a computer/server, Cat5e/6 cabling connects from an available server port to a B078-101-PS2,

B078-101-USB, or B078-101-USB-1 SIU, which in turn connects to the computer/server.

Rackmount KVM Switch Front View

The NetCommander IP front panel is illustrated in the figure below. Note: The figure below shows a B072-016-IP, but the front panel will be functionally the same for all models.

11MODEL:6B072 - 016 - IP

1

1Power LED – This Blue LED illuminates to indicate that the unit is powered on. No light indicates that the unit is powered off. When a LAN redundancy event occurs, and LAN 2 takes over for LAN 1, this LED will blink slowly. To stop the LED from blinking after a redundancy event, the KVM must be powered off and back on.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents NetCommander IP Cat5 KVM Switch Table of Contents Legal Notice Features and BenefitsProduct Overview Client Computer Compatibility SafetyTerminology Target Server CompatibilitySystem Components Console KVM Switch Front View NetCommander IP UnitRackmount KVM Switch Front View Console KVM Switch Rear View2 2-Post Rack Console KVM Switch Instructions Rackmounting the NetCommander IPRackmount KVM Switch Rear View Standard Console KVM Switch InstructionsInitial Settings Default IP Address Connecting the SystemTo set the IPv4 address via the local console OSD To set the IP address via the Web Configuration InterfaceTo set the IPv6 address via the local console OSD Product Overview Product Overview Logging Into the Web Configuration Interface Web Configuration InterfaceToolbar Web Configuration Interface LayoutMy Targets Section Server available for accessServer Status Configuration SectionTo perform a firmware upgrade, follow these steps Firmware UpgradeWeb Configuration Interface To back up data Backup/RestoreTo install an SSL Certificate To restore dataSSL Certificate Device Configuring the Device ID settingsUsers To edit an account To add an accountTo delete a User Switch ConfigurationTo edit a port name To Add a PDU To configure User TargetsPower Devices User TargetsTo Delete a PDU To Edit an existing PDUTo configure the power outlets Power OutletsSecurity To configure the serial port settingsTo configure the security settings Serial PortsAccount Blocking section Authentication Web Configuration Interface Basic, User, and Group Sample Permission String Date & Time Password SectionTo configure the date and time To change the passwordTo clear the Events Log Events SectionTo view the Events Log To reload the Events LogStarting a Remote Session Conducting a Remote SessionTo start a remote session To mount the ISO as virtual media Remote Session ToolbarPin Toolbar SessionTo set the session profile To unmount an ISO fileVideo Power To manually adjust the video settingsTo add a keyboard sequence KeysTo edit a predefined keyboard sequence To record a keyboard sequenceTo delete a keyboard sequence Mouse To set the Mouse Settings modeConducting a Remote Session To calibrate the mouse pointers To align the mouse pointersMouse Synchronization and Keyboard/Mouse Response Time Tips Full Screen Shared SessionExclusive Session Server/SerialLocal Console Tuning F5Move Label F1 F2 Setting Power ManagementTo Power Manage a computer To set the IPv4 address via the local console OSD To change the keyboard language Changing the HotkeyInputing and Updating DDC Information Browser Security Serial Port PinoutSecurity Certificate Installation Security Certificate Installation Java Security Security Certificate Installation Security Certificate Installation Chrome browsers Max Resolution Technical SpecificationsWarranty and Warranty Registration Video Resolution and Refresh Rates
Related manuals
Manual 90 pages 26.84 Kb Manual 1 pages 43.68 Kb

B070-008-19-IP, B072-008-IP, B070-016-19-IP, B072-016-IP specifications

The Tripp Lite B070-016-19-IP is a highly versatile 16-port KVM switch that serves as a reliable solution for managing multiple servers or computers from a single set of keyboard, video monitor, and mouse. This device is particularly useful in data centers, server rooms, and other environments where space and efficient management are crucial.

One of the standout features of the B070-016-19-IP is its ability to support remote access. With built-in IP capabilities, administrators can manage connected devices from anywhere in the world, enhancing operational efficiency. This is particularly important in today's increasingly mobile work environments, where remote troubleshooting and management can save time and resources.

The switch supports a variety of video resolutions up to 1920 x 1200, which ensures sharp and clear visual output, making it suitable for high-definition applications. Additionally, it is compatible with all major operating systems, further ensuring versatility in a multi-platform environment. The B070-016-19-IP features a compact design that can be easily integrated into existing systems without requiring significant reconfiguration.

The device employs advanced security measures for remote access, including enhanced encryption to protect sensitive data and server access. This includes features such as user authentication and various access levels, ensuring that only authorized personnel can manage the systems.

Built for durability and reliability, the Tripp Lite B070-016-19-IP is designed with robust construction that can withstand the rigors of daily operation in demanding environments. The device also includes a built-in firmware upgrade capability, keeping it up to date with the latest advancements and features.

In terms of connectivity, the switch offers multiple interfaces, allowing for seamless integration with various hardware configurations. It utilizes standard RJ-45 ports for connection, making installation straightforward and efficient.

Overall, the Tripp Lite B070-016-19-IP KVM switch stands out for its powerful blend of features, flexibility, and security, making it an ideal choice for IT professionals who require efficient management of multiple servers or computers. Whether used in a data center or an office, this KVM switch provides the tools necessary for effective system administration and optimal resource utilization.
Top Page Image Contents