Tripp Lite B072-016-IP Terminology, Target Server Compatibility, Client Computer Compatibility

Page 4

1.. Product Overview

1..2 Terminology

The following table describes terms used in this guide.

Term

Definition

 

 

Target Server

The computer/server that is connected directly to the KVM, and which is accessed via the local console or by a

 

Client Computer running a remote session.

 

 

Client Computer

A computer running a remote session, which is used to access computer/servers or devices connected to the KVM.

 

 

Remote Session

The process of remotely accessing the KVM via Client Computer, and controlling Target Servers and other

 

connected devices.

 

 

RICCs/ROCs/SIUs

RICC, ROC, and SIU refer to the dongles that are used to connect the KVM switch to a computer/server via Cat5e/6

 

cable. RICCs are the earliest versions of these dongles, and stand for Remote Interface Connection Cable. ROCs

 

are the second generation of these dongles, and stand for RICC on Cable. SIUs are the current versions of these

 

dongles, and stand for Server Interface Units. Functionally, they all serve the same purpose. The B078-101-PS2,

 

B078-101-USB, and B078-101-USB-1 are the SIUs that will be used with the NetCommander IP KVM switches.

 

 

1..3 Target Server Compatibility

•PS/2 and USB computers/servers

•Computer/servers with a HD15 (VGA) port

•Computer/servers running Windows or Linux operating systems

1..4 Client Computer Compatibility

•Pentium 4 with 2 GB memory

•Supports Windows and Linux operating systems.

•Windows operating systems can use Internet Explorer, Firefox, or Chrome browsers.

•Linux operating systems can use Firefox or Chrome browsers.

1..5 Safety

•Read all of these instructions. Save them for future reference.

•Follow all warnings and instructions marked on the device.

•Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

•This device is designed for IT power distribution systems with up to 230V phase-to-neutral voltage.

•Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result.

•Do not use the device near water.

•Do not place the device near, or over, radiators or heat registers.

•The device cabinet is provided with slots and openings to permit adequate ventilation. To ensure reliable operation and protect against overheating, these openings must never be blocked or covered.

•The device should not be placed on a soft surface (bed, sofa, rug, etc.), as this will block its ventilation openings. Likewise, the device should not be placed in a built-in enclosure unless adequate ventilation has been provided.

•Never spill liquid of any kind on the device.

•Unplug the device from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

•The device should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

•To prevent damage to your installation, ensure that all devices are properly grounded.

•The device is equipped with a 3-wire grounding type plug. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not attempt to defeat the purpose of the grounding-type plug. Always follow your local/national wiring codes.

•Position system cables and power cables carefully to ensure that nothing rests on any cable. Route the power cord and cables so that they cannot be stepped on or tripped over.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents NetCommander IP Cat5 KVM Switch Table of Contents Legal Notice Features and BenefitsProduct Overview Safety TerminologyTarget Server Compatibility Client Computer CompatibilitySystem Components NetCommander IP Unit Console KVM Switch Front ViewConsole KVM Switch Rear View Rackmount KVM Switch Front ViewRackmounting the NetCommander IP Rackmount KVM Switch Rear ViewStandard Console KVM Switch Instructions 2 2-Post Rack Console KVM Switch InstructionsConnecting the System Initial Settings Default IP AddressTo set the IPv4 address via the local console OSD To set the IP address via the Web Configuration InterfaceTo set the IPv6 address via the local console OSD Product Overview Product Overview Web Configuration Interface Logging Into the Web Configuration InterfaceWeb Configuration Interface Layout ToolbarServer available for access My Targets SectionConfiguration Section Server StatusFirmware Upgrade To perform a firmware upgrade, follow these stepsWeb Configuration Interface Backup/Restore To back up dataTo install an SSL Certificate To restore dataSSL Certificate Configuring the Device ID settings DeviceUsers To add an account To edit an accountTo delete a User Switch ConfigurationTo edit a port name To configure User Targets Power DevicesUser Targets To Add a PDUTo Edit an existing PDU To Delete a PDUPower Outlets To configure the power outletsTo configure the serial port settings To configure the security settingsSerial Ports SecurityAccount Blocking section Authentication Web Configuration Interface Basic, User, and Group Sample Permission String Password Section To configure the date and timeTo change the password Date & TimeEvents Section To view the Events LogTo reload the Events Log To clear the Events LogStarting a Remote Session Conducting a Remote SessionTo start a remote session Remote Session Toolbar Pin ToolbarSession To mount the ISO as virtual mediaTo unmount an ISO file To set the session profileVideo To manually adjust the video settings PowerKeys To add a keyboard sequenceTo edit a predefined keyboard sequence To record a keyboard sequenceTo delete a keyboard sequence To set the Mouse Settings mode MouseConducting a Remote Session To calibrate the mouse pointers To align the mouse pointersMouse Synchronization and Keyboard/Mouse Response Time Tips Shared Session Exclusive SessionServer/Serial Full ScreenLocal Console Tuning F5Move Label F1 F2 Setting Power ManagementTo Power Manage a computer To set the IPv4 address via the local console OSD To change the keyboard language Changing the HotkeyInputing and Updating DDC Information Serial Port Pinout Browser SecuritySecurity Certificate Installation Security Certificate Installation Java Security Security Certificate Installation Security Certificate Installation Technical Specifications Chrome browsers Max ResolutionVideo Resolution and Refresh Rates Warranty and Warranty Registration
Related manuals
Manual 90 pages 26.84 Kb Manual 1 pages 43.68 Kb

B070-008-19-IP, B072-008-IP, B070-016-19-IP, B072-016-IP specifications

The Tripp Lite B070-016-19-IP is a highly versatile 16-port KVM switch that serves as a reliable solution for managing multiple servers or computers from a single set of keyboard, video monitor, and mouse. This device is particularly useful in data centers, server rooms, and other environments where space and efficient management are crucial.

One of the standout features of the B070-016-19-IP is its ability to support remote access. With built-in IP capabilities, administrators can manage connected devices from anywhere in the world, enhancing operational efficiency. This is particularly important in today's increasingly mobile work environments, where remote troubleshooting and management can save time and resources.

The switch supports a variety of video resolutions up to 1920 x 1200, which ensures sharp and clear visual output, making it suitable for high-definition applications. Additionally, it is compatible with all major operating systems, further ensuring versatility in a multi-platform environment. The B070-016-19-IP features a compact design that can be easily integrated into existing systems without requiring significant reconfiguration.

The device employs advanced security measures for remote access, including enhanced encryption to protect sensitive data and server access. This includes features such as user authentication and various access levels, ensuring that only authorized personnel can manage the systems.

Built for durability and reliability, the Tripp Lite B070-016-19-IP is designed with robust construction that can withstand the rigors of daily operation in demanding environments. The device also includes a built-in firmware upgrade capability, keeping it up to date with the latest advancements and features.

In terms of connectivity, the switch offers multiple interfaces, allowing for seamless integration with various hardware configurations. It utilizes standard RJ-45 ports for connection, making installation straightforward and efficient.

Overall, the Tripp Lite B070-016-19-IP KVM switch stands out for its powerful blend of features, flexibility, and security, making it an ideal choice for IT professionals who require efficient management of multiple servers or computers. Whether used in a data center or an office, this KVM switch provides the tools necessary for effective system administration and optimal resource utilization.
Top Page Image Contents