Moxa Technologies 405A SERIES, EDS-408A Using Communication Redundancy, Turbo Ring Concept

Page 33

EDS-408A/405A Series User’s Manual

Featured Functions

Trap Community

 

 

 

 

 

 

 

 

 

 

Setting

 

Description

Factory Default

 

 

character string

 

Use a community string match for

public

 

 

 

authentication; Maximum of 30 characters.

 

Private MIB information

 

 

 

Switch Object ID

 

 

 

 

 

 

 

 

Setting

 

Description

Factory Default

 

 

8691.7.1

 

The EDS’s enterprise value

Fixed

 

This value cannot be changed.

Using Communication Redundancy

Setting up Communication Redundancy on your network helps protect critical links against failure, protects against network loops, and keeps network downtime at a minimum.

The Communication Redundancy function allows the user to set up redundant loops in the network to provide a backup data transmission route in the event that a cable is inadvertently disconnected or damaged. This feature is particularly important for industrial applications, since it could take several minutes to locate the disconnected or severed cable. For example, if the EDS is used as a key communications component of a production line, several minutes of downtime could result in a big loss in production and revenue. The EDS supports three different protocols to support this communication redundancy function—Rapid Spanning Tree/ Spanning Tree Protocol (IEEE 802.1W/1D), Turbo Ring, and Turbo Ring V2.

When configuring a redundant ring, all switches on the same ring must be configured to use the same redundancy protocol. You cannot mix the “Turbo Ring,” “Turbo Ring V2,” and STP/RSTP protocols on the same ring. The following table lists the key differences between each feature. Use this information to evaluate the benefits of each, and then determine which features are most suitable for your network.

 

 

 

Turbo Ring V2

Turbo Ring

STP

RSTP

 

 

Topology

Ring

Ring

Ring, Mesh

Ring, Mesh

 

 

Recovery Time

< 20 ms

< 300 ms

Up to 30 sec.

Up to 5 sec

 

 

NOTE

Most of MOXA’s managed switches now support two proprietary Turbo Ring protocols:

(1)“Turbo Ring” refers to the original version of MOXA’s proprietary redundant ring protocol, which has a recovery time of under 300 ms.

(2)“Turbo Ring V2” refers to the new generation Turbo Ring, which has a recovery time of under 20 ms.

In this manual, we use the terminology “Turbo Ring” ring and “Turbo Ring V2” ring to differentiate between rings configured for one or the other of these protocols.

The Turbo Ring Concept

MOXA developed the proprietary Turbo Ring protocol to optimize communication redundancy and achieve a faster recovery time on the network.

The Turbo Ring and Turbo Ring V2 protocols identify one switch as the master of the network, and then automatically block packets from traveling through any of the network’s redundant loops.

3-18

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Second Edition, July Moxa EtherDevice Switch EDS-408A/405A Series User’s ManualCopyright Notice TrademarksDisclaimer Table of Contents Chapter EDS Configurator GUI Introduction Package Checklist Moxa EtherDevice SwitchInside the Future of Industrial Ethernet Technology Industrial vs. CommercialFeatures Optional AccessoriesUseful Utility and Remote Configuration Advanced Industrial Networking CapabilityGetting Started Connection Caution RS-232 Console Configuration 115200, None, 8, 1, VT100EDS-408A/405A Series User’s Manual Key Function Configuration Using a Telnet Console Configuration Using a Web Browser EDS-408A/405A Series User’s Manual Configuration Disabling Telnet and Browser AccessFeatured Functions System Identification Configuring Basic SettingsPassword PasswordAccount Accessible IP Any host can access the EDS-408A/405AAllowable Hosts Input format Enable PortName Port Transmission Speed NetworkFDX Flow Control Port TypeSwitch IP Address Auto IP ConfigurationSwitch Subnet Mask Default GatewayDaylight Saving Time TimeCurrent Time Current DateTurbo Ring DIP Switch How to Enable or Disable the Turbo Ring DIP Switches Disable the Turbo Ring DIP SwitchSet DIP switch as Turbo Ring / Set DIP switch as Turbo Ring How to Configure the Turbo Ring DIP Switches Redundancy Protocol drop-down box. See the ConfiguringTurbo Ring and Turbo Ring V2 section in this chapter for System File Update-By Remote Tftp System File Update-By Local Import/Export System File Update-By Backup Media Factory DefaultRestart Snmp Configuring SnmpSnmp Versions Snmp Read/Write SettingsV1, V2c Read Community V1, V2c Write/Read CommunityTrap Server IP/Name Setting Description Factory Default Setting Description Factory DefaultTurbo Ring Concept Using Communication RedundancyInitial setup of a Turbo Ring or Turbo Ring V2 ring Determining the Redundant Path of a Turbo Ring V2 Ring Ring Coupling ConfigurationRing Coupling for a Turbo Ring Ring Dual-Homing Configuration applies only to Turbo Ring Dual-Ring Configuration applies only to Turbo RingConfiguring Turbo Ring Configuring Turbo Ring and Turbo RingNow Active Master/SlaveRedundancy Protocol Enable Ring CouplingSet as Master Redundant PortsRing 1/2-Master/Slave Ring 1/2-StatusRing 1/2-1st Ring Port Status Ring 1/2-2nd Ring Port StatuCoupling-Mode Enable RingIndicates either None, Dual Homing, or Ring Coupling Coupling-Coupling Port statusCoupling Mode Primary/Backup PortSTP/RSTP Concept What is STP? STP Requirements How STP WorksSTP Reconfiguration STP ConfigurationDifferences between Rstp and STP Port Speed Path Cost 802.1D Edition 802.1w-2001STP Example Using STP on a Network with Multiple VLANsConfiguring STP/RSTP Root/Not Root Forwarding DelayProtocol of Redundancy Bridge priorityConfiguration Limits of RSTP/STP What is Traffic Prioritization? Using Traffic PrioritizationTraffic Prioritization Concept How Traffic Prioritization WorksDifferentiated Services DiffServ Traffic Marking Ieee 802.1p Priority Level Ieee 802.1D Traffic TypeTraffic Prioritization Traffic Queues QoS Classification Configuring Traffic PrioritizationQueuing Mechanism Inspect TOSDefault Port Priority Inspect COSCoS Mapping What is a VLAN? Using Virtual LANsVirtual LAN Vlan Concept TOS/DiffServ MappingUsing Virtual LANs Port-based VLANs and the Moxa EtherDevice SwitchBenefits of VLANs Settings-Turbo Ring DIP Switch Using Rate Limiting Configuring Rate LimitingPolicy Configuring Email Warning Using Auto WarningConfiguring Email Settings Email Warning Events SettingsActivate your settings and test email if necessary Event TypesEmail Settings MoxaEtherDeviceSwitch0001@SwitchLocationPort Event Configuring Relay Warning Activate your settings Relay Warning Events SettingsUsing Line-Swap-Fast-Recovery Override Relay Warning SettingsRelay Warning List Using Set Device IP Configuring Line-Swap Fast RecoveryEnable Line-Swap-Fast-Recovery Configuring Set Device IP Using DiagnosisMirror Port Desired IP AddressInput data stream PingOutput data stream Bi-directionalUsing the Monitor Monitor by SwitchMonitor by Port ALL Using the MAC Address TableUsing Syslog Using Event LogSyslog Server EDS Configurator GUI Broadcast Search Starting EDS ConfiguratorSearch by IP address Upgrade FirmwareModify IP Address Export Configuration Import Configuration Unlock Server EDS-408A/405A Series User’s Manual MIB II.16 Rmon MIB GroupsPower SpecificationsTechnology InterfaceMechanical EnvironmentRegulatory Approvals Service Information Following services are provided Moxa Internet ServicesProblem Report Form Moxa ProductsSerial Number Product Return Procedure
Related manuals
Manual 82 pages 15.35 Kb

405A SERIES, EDS-408A specifications

Moxa Technologies has established itself as a leader in networking solutions, particularly for industrial applications. Among their cutting-edge products is the 405A Series, specifically the EDS-408A model, which exemplifies Moxa's commitment to performance, reliability, and versatility in industrial Ethernet switches.

The EDS-408A is an 8-port industrial Ethernet switch that offers an impressive array of features and capabilities designed to meet the demands of harsh environments. One of its main highlights is the ability to support both 10/100 Mbps Fast Ethernet and Gigabit Ethernet connections, providing users with the flexibility to integrate a range of devices within their network. Its robust design ensures that it operates seamlessly in extreme conditions, with a wide operating temperature range from -40 to 75 degrees Celsius.

The EDS-408A is built to support an array of networking topologies. It features advanced Ethernet switching technologies that enable fast and efficient data transfer while minimizing latency. The device is equipped with wire-speed forwarding capabilities, which is vital for maintaining high performance in heavy network traffic scenarios.

Another key feature of the EDS-408A is its redundancy support. The switch incorporates various redundancy protocols, including Rapid Spanning Tree Protocol (RSTP) and MRP (Media Redundancy Protocol), which enhance network reliability by allowing quick recovery in the event of a failure. This ensures continuous network uptime, which is critical for industrial applications.

Furthermore, Moxa Technologies has adopted an user-friendly web-based management interface in the EDS-408A, simplifying the configuration and monitoring process. This allows system administrators to easily manage settings, monitor traffic, and troubleshoot issues in real time. Additionally, the switch supports SNMP (Simple Network Management Protocol) for remote monitoring and management, enabling organizations to keep their networks optimized.

Security is another paramount feature of the EDS-408A. It includes built-in security mechanisms such as port security, VLAN, and access control lists (ACLs), which help safeguard sensitive network segments from unauthorized access.

In conclusion, Moxa Technologies' EDS-408A model from the 405A Series is a robust and feature-rich industrial Ethernet switch designed for demanding environments. With its support for various network protocols, redundancy features, user-friendly management, and enhanced security, the EDS-408A stands out as a reliable solution for organizations looking to enhance their industrial networking capabilities.
Top Page Image Contents