Moxa Technologies EDS-508 user manual Using Monitor, Ping, Monitor by Switch

Page 72

EDS-508 Series User’s Manual

Featured Functions

STEP 2

Be sure to activate your settings before exiting.

•When using the Web Browser interface, activate by clicking on the Activate button.

•When using the Console utility, activate by first highlighting the Activate menu option, and then press Enter. You should receive the Mirror port settings are now active! (Press any key to continue) message.

Ping

The Ping function uses the ping command to give users a simple but powerful tool for troubleshooting network problems. The function’s most unique feature is that even though the ping command is entered from the user’s PC keyboard, the actual ping command originates from MOXA EtherDevice Switch itself. In this way, the user can essentially “sit on top of MOXA EtherDevice Switch” and send ping commands out through its ports.

To use the Ping function, type in the desired IP address, and then press Enter from the Console utility, or click on Ping when using the Web Browser interface.

Using Monitor

You can monitor statistics in real time from MOXA EtherDevice Switch’s web console and serial console.

Monitor by Switch

Access the Monitor by selecting “system” from the left selection bar. Monitor by System allows the user to view a graph that shows the combined data transmission activity of all of MOXA EtherDevice Switch’s 8 ports. Click on one of the four options—All Packets, TX Packets, RX Packets, or Error Packets—to view transmission activity of specific types of packets. Recall that TX Packets are packets sent out from MOXA EtherDevice Switch, RX Packets are packets received from connected devices, and Error Packets are packets that did not pass TCP/IP’s error checking algorithm. The All Packets option displays a graph that combines TX, RX, and Error Packet activity. The four graphs (All Packets, TX Packets, RX Packets, and Error Packets) have the same form, so we show here only the All Packets graph. The graph displays data transmission activity by showing Packets/s (i.e., packets per second, or pps) versus sec. (seconds). In fact, three curves are displayed on the same graph: Uni-castpackets (in red color), Multi-castpackets (in green color), and Broad-castpackets (in blue color). The graph is updated every few seconds, allowing the user to analyze data transmission activity in real-time.

3-56

Page 71 Page 73
Image 72
Page 71 Page 73
Contents Moxa EtherDevice Switch User’s Manual EDS-508 Series Second Edition, NovemberMoxa EtherDevice Switch EDS User’s Manual Copyright NoticeTrademarks DisclaimerTable of Contents Chapter EDS Configurator GUI Introduction Moxa EtherDevice Switch Package ChecklistInside the Future of Industrial Ethernet Technology Industrial vs. CommercialFeatures Useful Utility and Remote ConfigurationAdvanced Industrial Networking Capability Designed for Industrial ApplicationsPage Getting Started Using the RS-232 Serial Console 115200, None, 8, 1, VT100 Connection CautionEDS-508 Series User’s Manual Getting Started Using the Telnet Console Key FunctionEDS-508 Series User’s Manual Getting Started Using Web Configuration For details Page Featured Functions Configuring Basic Settings Switch Name Setting Descriptions Factory DefaultSwitch Location Setting Descriptions Factory Default Switch Description Setting Descriptions Factory DefaultPassword Disable Telnet/Web ConsoleSetting Descriptions Factory Default Account NameAccessible IP Password Setting# Hosts on the specific subnet can access the NE-4000T # Any host can access the NE-4000TEnable/Disable Port PortName Port Transmission Speed Port TypeFDX Flow Control Auto IP Configuration Switch IP AddressSwitch Subnet Mask Default GatewayCurrent Time Setting Description Factory Default TimeDNS IP Address Current Date Setting Description Factory Default Time Zone Setting Description Factory DefaultSystem Up Time System File Update-By Remote Tftp Tftp Server IP/Name Setting Description Factory DefaultLog file path and name Setting Description Factory Default System File Update-By Local Import/Export Configuration File ExportConfiguration File Import Log File ExportUsing Port Trunking Factory DefaultConcept of Port Trunking Configuring Port Trunking Port Trunking SettingsTrunking settings Using Snmp Port setting informationEnable/Disable Configuring Snmp Snmp Read/Write Settings Snmp VersionsV1, V2c Read Community V1, V2c Read/Write CommunityAdmin Auth. Type For Snmp V1, V2c, V3 and V3 only Admin Data Encryption Key For Snmp V1, V2c, V3 and V3 onlyUser Auth. Type For Snmp V1, V2c, V3 and V3 only User Data Encryption Key For Snmp V1, V2c, V3 and V3 onlyUsing Communication Redundancy Trap SettingsPrivate MIB information Concept of Turbo RingWhen the number of EDS units in the Turbo Ring is even Page Switch a Coupler Configuring Turbo Ring Concept of STP/RSTP What is STP? How STP Works STP RequirementsSTP Configuration STP ReconfigurationHow Rstp Differs from STP Port Speed Path Cost 802.1D Edition 802.1w-2001Using STP on a Network with Multiple VLANs STP ExampleConfiguring STP/RSTP Root/Not Root Protocol of RedundancyBridge priority Hello time secEnable STP per Port Configuration Limits of RSTP/STPMax. Age sec Port PriorityUsing Traffic Prioritization What is Traffic Prioritization?Concept of Traffic Prioritization How Traffic Prioritization WorksDifferentiated Services DiffServ Traffic Marking Ieee 802.1p Priority Level Ieee 802.1D Traffic TypeTraffic Prioritization Configuring Traffic Prioritization QoS ClassificationTraffic Queues Default Port Priority Queuing MechanismInspect TOS Inspect COSCoS Mapping TOS/DiffServ MappingUsing Virtual LAN What is a VLAN?Concept of Virtual LAN Vlan Benefits of VLANsVLANs and Moxa EtherDevice Switch Management VlanCommunication Between VLANs VLANs Tagged and Untagged MembershipSample Applications of VLANs using Moxa EtherDevice Switch Device a Switch a Switch BConfiguring 802.1Q Vlan Vlan Port SettingsManagement Vlan Setting Port PvidPort Fixed Vlan List Tagged Port Forbidden Vlan ListUsing Multicast Filtering What is an IP Multicast?Concept of Multicast Filtering Vlan TableMulticast Filtering Network without multicast filteringConfiguring Multicast Filtering Multicast Filtering and Moxa EtherDevice SwitchIgmp Multicast Filtering Enabling Igmp SnoopingIgmp Snooping Settings Querier interval Igmp Snooping Enable GlobalIgmp Snooping Enable per Vlan Static Multicast Router PortUsing Rate Limiting Add Static Multicast MACIgmp Table Add New Static Multicast Address to the ListConfiguring Rate Limiting Ingress PolicyRate of Low Priority Queue Rate of Normal Priority QueueUsing Port Lock Adding a Static Unicast MAC AddressRate of Medium Priority Queue Rate of High Priority QueueUsing Auto Warning Configuring Port LockConfiguring Email Warning Add Static Unicast MAC AddressEmail Alarm Events Settings Configuring Email SettingsActivate your settings and test email if necessary Event TypesEmail Settings MoxaEtherDeviceSwitch0001@SwitchLocationPort Event Configuring Relay Warning Configuring Relay Event TypesMail Server IP/Name Email AddressRelay Alarm Events Settings Activate your settingsUsing Line-Swap-Fast-Recovery Relay Alarm ListOverride relay alarm settings Using Set Device IP Configuring Line-Swap Fast RecoveryEnable Line-Swap-Fast-Recovery Configuring Set Device IP Set up the connected devicesUsing Diagnosis Mirror PortDesired IP Address Output data streamUsing Monitor Monitor by SwitchPing Monitor by Port Using the MAC Address Table ALLUsing Event Log Page EDS Configurator GUI Starting EDS Configurator Broadcast SearchSearch by IP address Upgrade Firmware Modify IP AddressExport Configuration Import Configuration Unlock Server LockedUnlocked BlankFixed Locked FixedUnlocked Fixed MIB Groups Page Specifications TechnologyInterface Optical FiberPower MechanicalEnvironment Regulatory ApprovalsService Information Moxa Internet Services Following services are providedProblem Report Form Moxa Product % EDS-508Serial Number Product Return Procedure
Related manuals
Manual 46 pages 23.84 Kb
Top Page Image Contents