3 Connect
Make the following connections to use your HomeTheater System.
Basic connections:
•Video
•Speakers and subwoofer
•Power
Optional connections:
•Radio antenna
•Audio
•Audio from TV
•Audio from cable box/recorder/ game console
•Other devices
•Portable media player
•USB device
•iPod
•Attach table stand
•Mount the Home Theater System
•Mount the speakers
Note
•Refer to the type plate at the back or bottom of the product for identi cation and supply ratings.
•Before you make or change any connections, ensure that all the devices are disconnected from the power outlet.
Tip
•Different types of connectors may be used to connect this product to your TV, depending on availability and your needs. A comprehensive interactive guide to help you connect your product is available at www.connectivityguide. philips.com.
Place the HomeTheater System
•Place the Home Theater System where it cannot be pushed, pulled over or knocked down. Do not place it in an enclosed cabinet.
•Be sure that you have full access to the power cord for easy disconnection of the Home Theater System from the power supply.
LEFT
RIGHT
1Place this Home Theater System near the TV.
2Place the speakers system at normal listening
3Place the subwoofer at the corner of the room or at least 3 feet away from the TV.
Tip
•To avoid magnetic interference or unwanted noise, never place this Home Theater System too close to any radiation devices.
Note
•Attach the table stand to this Home Theater System before place it on a table top. (see ‘Attach table stand’ on page 17)
•You can mount this Home Theater System (see ‘Mount the Home Theater System’ on
page 18).
10EN