Connect video cables
Connect this HomeTheater System toTV to view disc play. Select the best video connection that theTV can support.
•Option 1: Connect to the HDMI jack (for a HDMI, DVI or
•Option 2: Connect to the component video jacks (for a standard TV or Progressive Scan TV).
•Option 3: Connect to the video (CVBS) jack (for a standard TV).
Note
•You must connect this Home Theater System directly to a TV.
Before you connect
1Push up the catch and remove the rear cover.
2Connect the cables to the corresponding jacks and direct the cables to the open hole on top.
•See the connection options in the following pages.
3Once complete, close the rear cover.
Note
•All the cables must be placed inside the rear panel in order to close the rear cover properly.
Option 1: Connect to the HDMI jack
English
HDMI OUT
Connect
HDMI IN
1Connect an HDMI cable (not supplied) to the HDMI OUT jack on this Home Theater System and the HDMI input jack on the TV.
Note
•If your device supports HDMI CEC, you can control compliant devices with a single remote control. (see ‘Get started’ > ‘Use Philips EasyLink’).
Tip
•If the TV has a DVI connection only, connect via a HDMI/DVI adaptor. Connect an audio cable for sound output.
•You can optimize the video output. (see ‘Adjust settings’ > ‘Video setup’ > [HDMI Setup]).
•This type of connection provides the best picture quality.
EN 11