Turn on Progressive Scan
If theTV supports progressive scan output, you can connect this HomeTheater System and theTV using component video connection. (see ‘Connect video cables’ > ‘Connect to the component video jack’).
Video Setup
|
| TV System |
|
|
|
|
| On |
|
| |
|
| TV Display | Off |
|
|
|
| Picture Setting |
|
|
|
|
| HDMI Setup |
|
|
|
|
| Closed Caption |
|
|
|
|
| Progressive |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1Turn on the TV and ensure that the TV progressive scan mode is deactivated (see the TV user manual).
2Switch the TV to the correct viewing channel for this Home Theater System.
3Press DISC.
4Press
SETUP.
5Press
to select [Video Setup] in the menu, then press 
.
6Select [Progressive] > [On], then press
OK.
» A warning message is displayed.
7To proceed, select [Ok] and press OK. » The progressive setup is complete.
Note
•If a blank/distorted screen is displayed, wait for 15 seconds for the auto recover.
•If no picture displayed, turn off the progressive scan mode as follows: 1) Press 
to open the disc compartment. 2) Press 
. 3) Press
AUDIO SYNC.
8Press 
SETUP to exit the menu.
9You can now turn on the progressive scan mode on the TV.
Note
•During play, when progressive scan mode is on for both this Home Theater System and the TV, distorted picture may display. Turn off the progressive scan feature on both this Home Theater System and the TV.
Use Philips EasyLink
Your HomeTheater System supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol.
Note
•Philips does not guarantee 100% interoperability with all HDMI CEC devices.
1 Turn on the HDMI CEC operations on the TV and other connected devices. See TVs/devices manual for details.
2You can now enjoy the following Philips EasyLink controls.
EasyLink
You can turn off or turn on all EasyLink features.
When you connect your Home Theater System to devices that support
To enable
English
Get started
EN 23