Napco Security Technologies GEM-RP3DGTL manual System Trouble Error Codes

SYSTEM TROUBLE ERROR CODES

Your control panel is capable of detecting a variety of troubles that may affect system performance. In the unlikely event that a problem should occur, the SYS TBL (system trouble) light will display in the window along with one or more of the following error codes. Several of these messages are intended for use by your installer or servicer. If any message appears that is unfamiliar to you, call your security professional for service.

E01-00AC power failure.

E02-00System low battery.

E03-00Communication failure.

E04-NNRF transmitter supervisory Failure; NN = transmitter number.

E05-NNRF transmitter low battery condition; NN = transmitter number.

E06-NNReceiver response failure; NN = receiver number.

E07-00Download failure.

E08-00Telephone line failure

E09-00System cold start.

E10-NNKeypad response failure; NN = keypad number.

E11-NNKeypad tamper condition; NN = keypad number.

E12-NNExpansion zone module response failure;

NN = module number.

E13-NNExpansion zone module tamper condition;

NN = module number.

E14-NNRelay board response failure; NN = relay board number.

E15-NNRf transmitter tamper condition; NN = transmitter number.

E16-NNReceiver jammed; NN = receiver number.

E17-NNReceiver tamper condition; NN = receiver number.

E18-NNKey fob transmitter low battery;

NN= key fob transmitter number.

E19-00User Program memory error.

E20-00Dealer Program memory error.

E21-00System shutdown.

E22-NNSensor activity failure; NN = zone number.

E23-00Burglary bus failure.

E24-00Service message.

E39-00Receiver capacity error.

E40-00RF Self Test Fail

E50-00Alarm Output Supervisory

E51-00Bell Supervisory

29

GEM-RP3DGTL.pub	Wednesday, August 18, 1999 14:03
page 29