Napco Security Technologies GEM-RP3DGTL manual Central Station Monitoring, Communicator Features

CENTRAL STATION MONITORING

Your alarm specialist may have programmed your system to be moni- tored by a central station. The built-in digital communicator can transmit emergency signals and status reports to the central station 24 hours a day.

armed. Any or all of up to 96 differ- ent users can each be identified. If your system reports on arming (Closing Report), the central station will acknowledge arming. This will

signal at the keypad as a “ringback” beep. Note: If the ringback signal is not heard, call for service.

Communicator Features

Abort Delay. Ask your installer which of your zones have abort delay, a delay that enables you to reset the system before it communicates to the central station.

∙Regular Burglary (Non-24-Hour) Zone reports are aborted by dis- arming within the delay period.

∙24-Hour Zones and zones pro- grammed to report restores must be restored first, then the panel armed and disarmed, all within the delay period.

Opening and/or Closing Report-

ing. Your system can notify the central station every time it is disarmed or

21

GEM-RP3DGTL.pub	Wednesday, August 18, 1999 14:03
page 21