Moxa Technologies CP-132U Series user manual Software Installation

Software Installation

2.Click on the desired CP-168U board, and then click on [Properties].

3.Select the [Ports Configuration] tab, click on the specific port, and then click on the [Port Setting] button.

4.Check the Auto Enumerating COM Name check-box to assign continuous COM numbers for subsequent ports. For example, if COM3 is assigned to Port 1, then COM4 will be automatically assigned to Port 2.

5.Select an Rx FIFO Trigger from the Rx FIFO Level pull-down list. Rx FIFO trigger levels from High to Low are available, with the default set to High (120 bytes). Check the Set the change to all ports check-box to apply the just defined Rx FIFO Trigger to

CP-132U Series User’s Manual 3-31