Moxa Technologies CP-132U Series user manual Software Installation

Software Installation

4. # modprobe mxser <- Universal PCI or PCI

(If you install ISA Boards, ase type command # insmod mxser ioaddr=0x???, 0x???, 0x???, 0x??? <- 1st ISA, 2nd ISA, 3rd ISA, 4th ISA)

Using /lib/modules/2.4.20-8/kernel/drivers/char/mxser.o

Warning: loading /lib/modules/2.4.20-8/kernel/drivers/char/mxser.o will taint the

kernel: no license

See http://www.tux.org/lkml/#export-tainted for information about tainted modules MOXA Smartio/Industio family driver version 1.7

Tty devices major number = 30, callout devices major number = 35 Found MOXA CP-168U series board (BusNo=2,DevNo=13) Module mxser loaded, with warnings

5.You can use Moxa diagnostic utility to verify driver status.

#cd /moxa/mxser/utility/diag

#./msdiag

==MOXA Smartio/Industio Family Multiport Board Status Utility(1.1) == Tty Device Major Number= 30.

Callout device Major Number= 35.

Board 1 : CP-168U series (BusNo=2, DevNo=13)

Port 1: 0xac00, max. baud rate = 230400 bps.

Port 2: 0xac08, max. baud rate = 230400 bps.

Port 3: 0xac10, max. baud rate = 230400 bps.

Port 4: 0xac18, max. baud rate = 230400 bps.

Port 5: 0xac20, max. baud rate = 230400 bps.

Port 6: 0xac28, max. baud rate = 230400 bps.

Port 7: 0xac30, max. baud rate = 230400 bps.

Port 8: 0xac38, max. baud rate = 230400 bps.

6.You can use Moxa terminal utility to test tty port.

#cd /moxa/mxser/utiltiy/term

#./msterm

CP-132U Series User’s Manual 3-51