Moxa Technologies NPort 5600 Snmp Settings, DNS server 1 / DNS server, Community name, Contact

Page 37

NPort 5600 Series User’s Manual

Configuring NPort Administrator

ATTENTION

In Dynamic IP environments, the firmware will retry 3 times every 30 seconds until network settings are assigned by the DHCP or BOOTP server. The Timeout for each try increases from 1 second, to 3 seconds, to 5 seconds.

If the DHCP/BOOTP Server is unavailable, the firmware will use the default IP address (192.168.127.254), Netmask, and Gateway for IP settings.

DNS server 1 / DNS server 2

Setting	Factory Default	Necessity
E.g., 192.168.1.1	None	Optional
(IP addresses of the form x.x.x.0 and
x.x.x.255 are invalid.)

When the user wants to visit a particular website, the computer asks a Domain Name System (DNS) server for the website’s correct IP address, and the computer users the response to connect to the web server. DNS is the way that Internet domain names are identified and translated into IP addresses. A domain name is an alphanumeric name, such as moxa.com, that it is usually easier to remember. A DNS server is a host that translates this kind of text-based domain name into the numeric IP address used to establish a TCP/IP connection.

In order to use NPort’s DNS feature, you need to set the IP address of the DNS server to be able to access the host with the domain name. NPort provides DNS server 1 and DNS server 2 configuration items to configure the IP address of the DNS server. DNS Server 2 is included for use when DNS sever 1 is unavailable.

NPort plays the role of DNS client. Functions that support domain name in NPort are Time Sever IP Address, TCP Client-Destination IP Address, Mail Server, SNMP Trap IP Address, and IP Location Server.

SNMP Settings

Community name

Setting	Factory Default	Necessity
1 to 39 characters	public	Optional
(E.g., Support, 886-89191230 #300)

A community name is a plain-text password mechanism that is used to weakly authenticate queries to agents of managed network devices.

Contact

Setting	Factory Default	Necessity
1 to 39 characters	None	Optional
(E.g., Support, 886-89191230 #300)

The SNMP contact information usually includes an emergency contact name and telephone or pager number.

Location

Setting	Factory Default	Necessity
1 to 39 characters	None	Optional
(E.g., Floor 1, office 2)

Specify the location string for SNMP agents such as NPort. This string is usually set to the street address where the NPort is physically located.

5-7

Image 37

Contents Seventh Edition, July NPort 5600 Series User’s ManualTrademarks Copyright NoticeDisclaimer Table of Contents Chapter IP Serial LIB Page Introduction Product Features Package ChecklistOverview Product Specifications Software Features Advanced Built-in FeaturesPower Requirements Serial Communication ParametersGetting Started ‰ Panel Layout ‰ Connecting the HardwareRear panel of NPort 5600 series DC Power Rear panel of NPort 5600 series AC PowerPanel Layout Front panel of NPort 5600 seriesWiring Requirements Connecting the HardwareConnecting NPort 5610/30/50-16/8’s Power Connecting NPort 5610-16/8-48V’s PowerGrounding NPort 5610-16/8-48V Connecting to the NetworkLED Indicators Connecting to a Serial DeviceLink Indicator on the Rear Panel of NPort 5650 Fiber Model Adjustable Termination Resistor for the RS-485 PortNPort 5650 DIP Switches Initial IP Address Configuration Default IP address Factory Default IP AddressInitializing NPort’s IP Address LCM DisplayDetailed Menu Options Button Name ActionLevel ARP NPort Administration SuiteTelnet Console NPort 5600 Series User’s Manual NPort 5600 Series User’s Manual NPort 5600 Series User’s Manual Choosing the Proper Operation Mode Real COM Mode Real COM ModeTCP Server Mode TCP Server ModeUDP Mode TCP Client ModePair Connection Mode Disabled Mode Reverse Telnet ModeRFC2217 Mode PPP Mode Web Console Configuration Opening Your Browser Basic Settings Server name TimeTime zone Local timeConsole Network SettingsIP Address IP ConfigurationNetmask GatewayDNS server 1 / DNS server Snmp SettingsCommunity name ContactAuto report to IP IP Address ReportAuto report to TCP port Auto report periodPort alias Serial SettingsSerial Parameters Real COM Mode Operating SettingsSetting Factory Default Necessity To 99 min Min Optional TCP alive check timeMax. connection Max connection Setting Factory Default Necessity RequiredMax connection 2 to Ignore jammed IPDelimiter Packing length Setting Factory Default Necessity RequiredDelimiter process Force transmitTCP Server Mode Max connection Packing length Command port Setting Factory Default Necessity 4001 RequiredSetting Factory Default Necessity 966 Optional Local TCP portInactivity time TCP Client ModeIgnore jammed IP Delimiter process Destination IP address 2/3/4 Destination IP addressDesignated Local Port 1/2/3/4 Connection controlConnect/Disconnect Description UDP Mode Force transmit Pair Connection Master Mode Pair Connection ModeSetting Factory Default Necessity To 99 min Min Required Blank Pair Connection Slave ModeSetting Factory Default Necessity To 99 min Optional Reverse Telnet ModeMap CR-LF RFC2217 Mode Disabled ModeSetting Factory Default Necessity To FF hex None Optional Packing length Setting Factory Default Necessity OptionalSetting Factory Default Necessity Yes or No Optional PPP ModeTCP/IP compression Source IP address Accessible IP SettingsIP netmask Modem Initial streamAny host can access the NPort Hosts on a specific subnet can access the NPortPPP User Table Allowable Hosts Input formatAuto warning E-mail and Snmp Trap Auto Warning SettingsMail Server Snmp Trap Server Event TypeDCD changed Setting Factory Default Necessity Enable, Disable OptionalDSR changed MailMonitor Line MonitorMonitor Async Monitor Async-Settings Change PasswordLoad Factory Defaults ‰ Overview ‰ Installing NPort Administrator ‰ Configuration Configuring NPort AdministratorInstalling NPort Administrator NPort 5600 Series User’s Manual IP Serial LIB NPort 5600 Series User’s Manual IP Serial LIB Configuration Broadcast Search Unlock Password Protection NPort 5600 Series User’s Manual IP Serial LIB Unlock LockBlank FixedConfiguring NPort NPort 5600 Series User’s Manual IP Serial LIB Upgrading Firmware Export/Import Add Target Æ Select target from the list Select Add Target NPort 5600 Series User’s Manual IP Serial LIB NPort 5600 Series User’s Manual IP Serial LIB NPort 5600 Series User’s Manual IP Serial LIB NPort 5600 Series User’s Manual IP Serial LIB COM Mapping Port MonitorOn-line COM Mapping NPort 5600 Series User’s Manual IP Serial LIB Fast Flush only flush local buffer NPort 5600 Series User’s Manual IP Serial LIB Off-line COM Mapping IP Location NPort 5600 Series User’s Manual IP Serial LIB IP Serial LIB Why Use IP Serial Library? What is IP Serial Library?How to install IP Serial Library? Example Program IP Serial LIB Function GroupsServer Control Port Control Input/Output Data Port Status Miscellaneous‰ Cable Wiring Diagrams Pinouts and Cable WiringEthernet Port Pinouts Port Pinout DiagramsSerial Port Pinouts RJ45 8-pins to Female DB9 Cable Wiring DiagramsEthernet Cables Serial Cables for NPort 5610/5650 RS-232RJ45 8-pins to Female DB25 RJ45 8-pins to Male DB9RJ45 8-pins to Female DB25 Serial Cables for NPort 5630 RS-422/4-wire RS-485NPort 5600 Series User’s Manual Well Known Port Numbers Serial Cables for NPort 5630 2-wire RS-485Serial Cables for NPort 5650 RS-422/4-wire RS-485 RJ45 8-pins to Male DB25 Serial Cables for NPort 5650 2-wire RS-485Pin Assignments for DB9 Male and Female Connectors Pin Assignments for DB9 and DB25 ConnectorsPin Assignments for DB25 Male and Female Connectors Well Known Port Numbers TCP Socket Application ServiceSnmp Agent with MIB II & RS-232 Like Group UDP Socket Application ServiceSnmp Agent with MIB II & RS-232 Like Group Address Translation MIB System MIB Interfaces MIBInput Signal Table Output Signal Table Auto IP Report Protocol Info n Auto IP Report FormatID List AP ID & Hardware ID Mapping TableService Information Following services are provided Moxa Internet ServicesMoxa Product Problem Report FormSerial Number Product Return Procedure