Q-Logic QLA12160 manual QLogic Corporation

Page 2

QLogic Corporation

Information furnished in this manual is believed to be accurate and reliable. However, QLogic Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these products are for illustrative purposes only. QLogic Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.

No part of this document may be copied nor reproduced by any means, nor translated nor transmitted to any magnetic medium without the express written consent of QLogic Corporation.

QLogic is a trademark of QLogic Corporation.

Seagate is a trademark of Seagate Technology, Inc.

Microsoft is a trademark of Microsoft Corporation.

All other brand and product names are trademarks or registered trademarks of their respective owners.

Document Revision History

Rev. A initial release, 6/22/99

Rev. B, update, 5/24/00 (QL12160L board added)

Rev. C, update, 9/14/01 (QLA12160L board deleted)

Boards Affected

QLA12160 (DC8110402)

Changes

Sections Affected

 

 

Deleted QLA12160L

All

Added 4 GB Addressing and Fast Command Posting

A.2.1

to host adapter settings

 

Moved SCSI ID, SCSI bus reset, SCSI bus reset

A.2.1, A.2.3

delay, and SCSI termination from host adapter

 

settings to SCSI bus settings

 

Deleted Host Adapter and Concurrent Command/

A.2.1

Data from host adapter settings

 

 

 

© 1999–2001 QLogic Corporation

First Printed: June 1999

All Rights Reserved Worldwide.

Printed in U.S.A.

QLogic Corporation, 26600 Laguna Hills Drive, Aliso Viejo, CA 92656

(800) 867-7274 or (949) 389-6000

Page ii

DC8151101-00 C

Image 2
Contents Hardware Installation Guide for QLA12160 Board QLogic Corporation Table of Contents Figures Scsi Data Transfer Rates IntroductionProduct Description Features Mixed Peripheral Support Features What You Need for Installation Hardware InstallationPreinstallation Procedures Installing the Device Activity Light Setting the Scsi TerminationScsi Termination Power Installation in the Computer Number Installation Help Installation Help Hardware Problem Checklist TroubleshootingProblems After Installation System Configuration Problem ChecklistScsi Problem Checklist Maximum Cable LengthConfiguration Settings IntroductionHost Adapter Settings Table A-1. Host Adapter SettingsScsi Device Settings Table A-2. Scsi Device SettingsEnable Device Scsi Bus Settings Table A-3. Scsi Bus SettingsScsi termination Table A-4. QLA12160 PortsAutoconfigure Scsi Devices Selectable Boot SettingsRaw Nvram Data Restore Default SettingsUsing SCSI-1 Devices Scan Scsi BusFast!UTIL Using SCSI-1 Devices Using SCSI-1 Devices Fast!UTIL DC8151101-00 C Scsi Termination Termination Jumpers for the QLA12160Figure B-1. QLA12160 Jumper Termination Table C-1. QLA12160 Board Operating Environment SpecificationsTable C-2. QLA12160 Board Specifications Specifications