Q-Logic QLA12160 manual Table of Contents

Table of Contents

Section 1	Introduction
1.1	Product Description	1-1
1.2	Features	1-2
1.2.1	Mixed Peripheral Support	1-3

Section 2	Hardware Installation
2.1	Preinstallation Procedures	2-1
2.2	What You Need for Installation	2-1
2.3	Setting the SCSI Termination	2-2
2.4	SCSI Termination Power	2-2
2.5	Installing the Device Activity Light	2-2
2.6	Installation in the Computer	2-3
2.7	Installation Help	2-5

Section 3	Troubleshooting
3.1	Problems After Installation	3-1
3.2	Hardware Problem Checklist	3-1
3.3	System Configuration Problem Checklist	3-1
3.4	SCSI Problem Checklist	3-2

Appendix A		Fast!UTIL
A.1	Introduction		A-1
A.2	Configuration Settings		A-1
A.2.1		Host Adapter Settings	A-2
A.2.2		SCSI Device Settings	A-3
A.2.3		SCSI Bus Settings	A-5
A.2.4		Autoconfigure SCSI Devices	A-7
A.2.5		Selectable Boot Settings	A-7
A.2.6		Restore Default Settings	A-8
A.2.7		Raw NVRAM Data	A-8
A.3	Scan SCSI Bus		A-8
A.4	SCSI Disk Utility		A-8
A.5	Using SCSI-1 Devices		A-8

DC8151101-00 C Page iii