Software Installation
4.Select an Rx FIFO Trigger from the Rx FIFO Level
5.Select a Tx FIFO Size from the Tx FIFO Level
| ||||
| Tx FIFO | Rx FIFO | Tx FIFO | Rx FIFO |
High | 128 | 120 | 64 | 56 |
Middle | 64 | 60 | 32 | 28 |
Low | 1 | 1 | 1 | 1 |
Unit: Bytes
6.Click [OK] in the Port X dialog box to confirm the port settings, and then click [OK] in the Property dialog box to complete the port settings.
Using PComm
The PComm Diagnostic program is a very useful tool for checking the status of MOXA’s multiport boards. It provides internal and external testing of IRQ, TxD/RxD, UART, CTS/RTS, DTR/DSR, etc. This program can be used to make sure that MOXA’s boards and ports are working properly.
To start this program, click on Start Æ Programs Æ PComm Lite 2000 ÆPComm Diagnostic.
NOTE: If you do not have the PComm software, you can download the free version of the software from Moxa’s website at www.moxa.com.
Using Event Log
To use Event Log to check MOXA boards, click Start Æ Settings Æ Control Panel Æ