TOA Electronics C-IF500 instruction manual Specifications, Optional Equipment

6. SPECIFICATIONS

Power Source	12 V DC
Current Consumption	100 mA
External Control	Master: RS-485, screwless connector,
	terminating resistance (100 Ω ) switch ON/OFF
	Slave*1: 4 channel, RS-485, screwless connector, RS-232C,
	D-sub connector (9-pin, male)
Display	Power LED indicator, communication LED indicators (TX, RX)
Maximum Cable Distance	RS-485: 1.2 km*2
	RS-232C: 10 m
Communication Speed	4800 bps, 9600 bps, 19200 bps, 38400 bps
Operating Temperature	–10 to +50°C
Operating Humidity	Under 90% (no due condensation produced)
Finish	Panel: Aluminum, black (30% glossy), paint
	Case: Pre-coated steel plate, black (30% glossy)
Dimensions	210 (w) x 46 (h) x 284.1 (d) mm
Weight	1.4 kg

Notes

•The unit cannot be used in the system with the transmission/reception switching interval of 2 bytes or less or where transmission signals could be simultaneously sent out from multiple slave terminals.

•The design and specifications are subject to change without notice for improvement.

*1 Communications cannot be made between slave terminals.

*2 Applies to the system where the unit and Combination camera are connected in a matched pair. Represents the total of connected cable distances if multiple Combination cameras or Interface units are connected in the system (when the CPEV-S cable thicker than 0.65 mm in diameter is used).

• Optional Equipment

MB-15B-BK Rack mounting bracket (for rack mounting one C-IF500 unit)

MB-15B-J Rack mounting bracket (for rack mounting two C-IF500 units)

Printed in Japan 133-12-742-1E