Pelco GW5000 manual Rear Panel Indicators, Unit Startup, Unit Shutdown, Unit Status

Page 19

uUnit Status

Unit status is indicated by one of the following three colors:

•Green: The unit is functioning normally.

•Amber: The unit is in configuration mode.

•Red: The unit is in an error condition (refer to Appendix F: Troubleshooting on page 40).

If the unit status indicator is flashing, the unit is in one of three modes (refer to Table E on page 40).

REAR PANEL INDICATORS

There are two indicators on the private network connector on the rear panel. The right indicator glows orange when there is a good connection between the GW5000 and a Gigabit Ethernet switch that is powered up. If the indicator does not glow, check the cable and the switch. Disregard the left indicator.

There is a green LED next to the public network connector that shows activity on the public network.

UNIT STARTUP

To start the unit:

1.Unlock and open the bezel cover. Be careful not to drop the bezel cover; it is not attached directly to the unit.

2.Turn on the rear panel power switch (if necessary).

3.Press the power button. The power indicator glows.

4.Close and lock the bezel cover.

POWER BUTTON

Figure 16. Opening the Front Bezel Cover

UNIT SHUTDOWN

You can shut down the GW5000 in either of two ways.

•An orderly shutdown lets the unit close its files and power down without affecting the data files. Use the orderly shutdown in most cases.

•An immediate shutdown is the same as disconnecting power. This option is not recommended; only use it in an emergency or when there is not enough time for an orderly shutdown.

WARNING: Loss or corruption of data may occur if there is not an orderly shutdown.

To shut down the unit:

1.Unlock and open the bezel cover. Be careful not to drop the bezel cover; it is not attached directly to the unit.

2.Select one of the following:

•For an orderly shutdown, quickly press and release the power button.

•For an immediate shutdown, press and hold the power button until the unit shuts down.

3.Close and lock the bezel cover.

C2694M (7/08)

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Endura GW5000 Gateway Page Contents Appendix E Bandwidth Selection Rack Mount Kit List of IllustrationsList of Tables Video Quality Caution Regulatory NoticesSecurity Notice Application Scenario DescriptionUSER-SUPPLIED Parts List Parts ListBefore You Begin Package Contents Shown Actual Size Product Serial Number Label Placement Equipment Placement and Rack MountingDesktop Installation Rack Mounting Assembling a Support Rail Repeat for the other rail set Rack Front Tightening the Thumbscrews Connecting to the Network Connecting PowerConnections Operation Front Panel Controls and IndicatorsUnit Status Rear Panel IndicatorsUnit Startup Unit ShutdownConfiguring the LAN Firewall Network ConfigurationIntroduction Testing WEB Client Connectivity Configuring the WAN FirewallResolving Router Source Address and Port Translation Accessing the Endura Network Over a Virtual Private NetworkHost Name Configuring the Endura GatewayLogging on to the WEB Client for the First Time Entering the Public Network Interface Host InformationPrivate Network Interface Entering the Private Network Interface Host InformationAdding Devices Addresses Adding Device Network AddressesNetwork Directory Interface Configuring the Network Directory InterfaceGetting Status of Archived Events Establishing Event Archive SettingsMaintaining the Gateway Setting the Maximum Number of UsersRestarting the Gateway Daemon Restoring the Default Database Rebooting the GatewayConfiguring the E-MAIL Server Sending Broadcast Messages Testing ConnectionsTesting Network Directory Connection Creating a User Configuring Users on the Web ClientEditing User Attributes and Roles Setting User AttributesAdding Gateways Replacing the Operating System Drive Appendix a Replacing the Operating System DriveAppendix B Updating Software Setup Update SoftwareAppendix C Configuring Internet Explorer Creating a NEW Computer in the Active Directory Creating a NEW Active Schema AttributeAppendix D Working with Multiple Gateways Creating a NEW User in the Active DirectoryFormat Appendix E Bandwidth SelectionBandwidth Bandwidth SelectionProblem Possible Causes Suggested Remedy Appendix F TroubleshootingVIDEO/AUDIO SpecificationsMinimum Recommended PhysicalProduct Warranty and Return Information ISO9001

GW5000 specifications

The Pelco GW5000 is a state-of-the-art video surveillance solution that stands out for its versatility and advanced functionality. This high-performance video management system is designed to meet the demands of various security applications ranging from small businesses to large-scale enterprises.

One of the key features of the GW5000 is its scalability. It supports up to hundreds of IP cameras, allowing organizations to expand their surveillance capabilities as needed. This adaptability makes it an ideal choice for facilities such as retail spaces, educational institutions, and critical infrastructure settings.

The GW5000 is built on a robust architecture that ensures seamless integration with various camera types, including Pelco's own range of cameras as well as third-party devices. This open-platform approach allows users to tailor their surveillance systems to their specific requirements without being locked into proprietary technology.

In terms of video quality, the GW5000 excels with support for high-definition video streams. Users can expect crisp and clear imagery, even in low-light conditions, due to support for advanced video encoding techniques such as H.265. This not only improves image quality but also reduces bandwidth and storage requirements, allowing for efficient data management.

Another standout characteristic of the GW5000 is its intelligent video analytics capabilities. The system comes equipped with features like motion detection, line crossing detection, and object tracking. These analytics help reduce false alarms and enhance the overall effectiveness of security monitoring by enabling proactive responses to potential threats.

User interface and ease of use are also top priorities in the design of the GW5000. The system features a user-friendly interface that simplifies navigation and management of video feeds. Users can easily access live view and playback functions, as well as configure system settings without extensive technical knowledge.

For remote access, the GW5000 offers mobile compatibility, enabling users to monitor their premises from anywhere through secure mobile applications. This feature is invaluable for business owners and security personnel who need to stay connected while on the move.

In conclusion, the Pelco GW5000 stands out in the field of video surveillance for its scalability, high-definition support, intelligent analytics, and ease of use. It offers a comprehensive solution that can adapt to the evolving needs of various industries, ensuring that security management remains efficient and effective. Whether for commercial, industrial, or public sector applications, the GW5000 is engineered to deliver exceptional performance in safeguarding valuable assets.
Top Page Image Contents