Pelco FX82012 manual Table D. Troubleshooting with Rear-Panel Indicators, Amber, Established

Page 26

Table D. Troubleshooting with Rear-Panel Indicators

Indicator Color	Meaning	Possible Cause	Corrective Action

RJ-45 10BASE-T/100BASE-TX Port Status LED - Left (Link/Activity)

Amber	A 10BASE-T link is	—	If 10BASE-T operation is
	established.		desired, no action is required.
			If 10BASE-T operation is not
			desired, refer to the Setting
			10BASE-T/100BASE-TX Port
			Modes of Operation section in
			this manual for information.

Flashing amber	Data activity is	—	If 10BASE-T operation is
	occurring on the		desired, no action is required.
	10BASE-T link—		If 10BASE-T operation is not
	data is being trans-		desired, refer to the Setting
	mitted or received.		10BASE-T/100BASE-TX Port
			Modes of Operation section in
			this manual for information.

Green	A 100BASE-TX link	—	If 100BASE-TX operation is
	is established.		desired, no action is required.
			If 100BASE-TX operation is
			not desired, refer to the
			Setting 10BASE-T/
			100BASE-TX Port Modes of
			Operation section in this
			manual for information.

Flashing green	Data activity is	—	If 100BASE-TX operation is
	occurring on the		desired, no action is required.
	100BASE-TX link—		If 100BASE-TX operation is
	data is being trans-		not desired, refer to the
	mitted or received.		Setting 10BASE-T/
			100BASE-TX Port Modes of
			Operation section in this
			manual for information.

			(Continued on next page)

26	C2624M (6/07)

Image 26

Contents Ethernet Switch Contents List of IllustrationsList of Tables FX Mode Switch SettingsRJ-45MDI/MDI-X Connector Pinouts Important Safety Instructions Risk of Electric Shock Do not Open Regulatory Notices Radio and Television InterferenceProduct Overview DescriptionC2624M 6/07 Multimode Models ModelsFX82012 module consists of the following series of models Single-Mode Models*†Front Panel Illustrates the front panel of the FX82012 moduleRear Panel Illustrates the rear panel of the FX82012 moduleInstallation Package ContentsFlow control default setting Autonegotiation is enabled by defaultFlow control is disabled by default 10BASE-T/100BASE-TX Modes of OperationSetting Fiber Failover Mode FX Mode SwitchMode of Operation MountingMounting the FX82012 Module to a Wall PAN Head with Wall Clip Lock Washer Connections Fiber connections Primary Fiber Port Connections in Sample Drop-and-Repeat Application Replace power supply TroubleshootingModule Reseat module or power Supply as necessary Meaning Replace local module Indication Fefi On local module Optical signalOptic Fault LED on local Section in this table By the remote linkMeaning Possible Cause Corrective Action Optic Fault LED If 10BASE-T operation is Table D. Troubleshooting with Rear-Panel IndicatorsAmber EstablishedMeaning Possible Cause Corrective Action If half-duplex mode is Duplex mode LinkRefer to the Setting Amber Port is set toFlashing green Port is set to Green Port is set to If 100BASE-TX full-duplexFull-duplex operation is not Tion or by manuallyTable D. Troubleshooting with Rear-Panel Indicators Specifications Budget PowerWavelength Optical Maximum Multimode 62.5/125 μmAppendix. RJ-45 Connector Pinouts Illustrates RJ-45 MDI/MDI-X connector pinoutsC2624M 6/07 Product Warranty and Return Information ISO9001