Pelco manual FX82012 module consists of the following series of models, Multimode Models

Page 9

MODELS

The FX82012 module consists of the following series of models:

Multimode Models:*

FX82012MSTR-2 Unmanaged Ethernet switch, one 10BASE-T/100BASE-TX port, two multimode ST fiber ports, one fiber per port (total of two fibers)

FX82012MSCR-2 Unmanaged Ethernet switch, one 10BASE-T/100BASE-TX port, two multimode SC fiber ports, one fiber per port (total of two fibers)

Single-Mode Models:*

FX82012SSTR-2 Unmanaged Ethernet switch, one 10BASE-T/100BASE-TX port, two single-mode ST fiber ports, one fiber per port (total of two fibers)

FX82012SSCR-2 Unmanaged Ethernet switch, one 10BASE-T/100BASE-TX ports, two single- mode SC fiber ports, one fiber per port (total of two fibers)

*For conformal coated models, replace the first letter F in the model number with the letter C. The conformal coated version of FX82012MSTR-2, for example, is CX82012MSTR-2.

Single-mode FC connectors are available upon request. Contact the factory for additional information.

OPTIONAL ACCESSORIES

The following optional accessories are available:

WM5001-3U

Wall mount base kit for single-width module

WM5001-3UEXP

Wall mount expansion kit for single-width module

RK5000-3U

19-inch rack mount chassis for 14 slots (no power), 3 RUs

RK5000PS-3U

19-inch rack mount chassis for 12 slots with power, 3 RUs

EPS5000-120

External rack power supply, 1 RU, dual 120 W power outputs

RK5001B-3U

Blank filler panel, single width

RK5002B-3U

Blank filler panel, double width

RK5001-1UEXP

Adapter kit that allows a 3 RU single-width fiber module to be used in

 

RK5000PS-5U rack mount chassis

C2624M (6/07)

9

Image 9
Contents Ethernet Switch List of Illustrations ContentsFX Mode Switch Settings RJ-45MDI/MDI-X Connector PinoutsList of Tables Important Safety Instructions Risk of Electric Shock Do not Open Radio and Television Interference Regulatory NoticesDescription Product OverviewC2624M 6/07 FX82012 module consists of the following series of models ModelsMultimode Models Single-Mode Models*†Illustrates the front panel of the FX82012 module Front PanelIllustrates the rear panel of the FX82012 module Rear PanelPackage Contents InstallationFlow control is disabled by default Autonegotiation is enabled by defaultFlow control default setting 10BASE-T/100BASE-TX Modes of OperationFX Mode Switch Setting Fiber Failover ModeMounting Mode of OperationMounting the FX82012 Module to a Wall PAN Head with Wall Clip Lock Washer Connections Fiber connections Primary Fiber Port Connections in Sample Drop-and-Repeat Application Troubleshooting Module Reseat module or power Supply as necessaryReplace power supply Meaning Optic Fault LED on local Section in this table Indication Fefi On local module Optical signalReplace local module By the remote linkMeaning Possible Cause Corrective Action Optic Fault LED Amber Table D. Troubleshooting with Rear-Panel IndicatorsIf 10BASE-T operation is EstablishedMeaning Possible Cause Corrective Action Refer to the Setting Duplex mode LinkIf half-duplex mode is Amber Port is set toFull-duplex operation is not Green Port is set to If 100BASE-TX full-duplexFlashing green Port is set to Tion or by manuallyTable D. Troubleshooting with Rear-Panel Indicators Specifications Wavelength Optical Maximum PowerBudget Multimode 62.5/125 μmIllustrates RJ-45 MDI/MDI-X connector pinouts Appendix. RJ-45 Connector PinoutsC2624M 6/07 Product Warranty and Return Information ISO9001