Schneider Electric manual Equipment Configuration, S7-200 Series Screen Description

Page 17

SIMATIC S7 Ethernet

Equipment Configuration

Overview

WARNING

UNINTENDED EQUIPMENT OPERATION

Read and understand the instructions in this section to ensure data is properly transferred. If you do not follow these instructions, incorrect data could be written to the PLC and the target machine.

Failure to follow these instructions can result in death, serious injury, or equipment damage.

To set up details about the communication process between the target machine and the PLC, use the [Equipment Configuration] dialog box.

For an overview of the driver and equipment settings, see Equipment Configuration.

Note:

zFor information on how to display the [Equipment Configuration] dialog box, see the online help.

S7-200 Series

Screen Description

Area

Description

 

 

IP Address

Enter the PLC unit’s IP address.

 

 

Module

Enter the module number to match the PLC configuration software.

 

 

Connection

Enter the connection number to match the PLC configuration software.

 

 

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Siemens AG Page Table of Contents Page Important Information Safety InformationPlease Note At a Glance About the BookDocument Scope Validity NoteUser Comments Product Related InformationWhats in this Chapter? Simatic S7 EthernetSubject of this Chapter Connection System StructureOverview Simatic S7 Ethernet Fetch/Write Supported Device AddressesS7-300/400 Series S7-200 Series Gap Span Consecutive Equipment AddressesScreen example of I/O Manager Configuration Manager ConfigurationS7-200 Series Screen Description Equipment ConfigurationFetch Fetch/Write Screen DescriptionS7-300/400 Series Screen Description Screen example of Device Address Configuration Device Address ConfigurationKeypad Simatic S7 Ethernet
Top Page Image Contents