Schneider Electric S7 manual Safety Information, Important Information

Page 5

Safety Information

Important Information

NOTICE

§

Read these instructions carefully, and look at the equipment to become familiar with the device before trying to install, operate, or maintain it. The following special messages may appear throughout this documentation or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.

The addition of this symbol to a Danger or Warning safety label indicates that an electrical hazard exists, which will result in personal injury if the instructions are not followed.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER

DANGER indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation, which, if not avoided, can result in death, serious injury, or equipment damage.

CAUTION

CAUTION indicates a potentially hazardous situation, which, if not avoided, can result in injury or equipment damage.

5

Image 5
Contents Siemens AG Page Table of Contents Page Important Information Safety InformationPlease Note At a Glance About the BookDocument Scope Validity NoteUser Comments Product Related InformationWhats in this Chapter? Simatic S7 EthernetSubject of this Chapter Connection System StructureOverview Simatic S7 Ethernet Fetch/Write Supported Device AddressesS7-300/400 Series S7-200 Series Gap Span Consecutive Equipment AddressesScreen example of I/O Manager Configuration Manager ConfigurationS7-200 Series Screen Description Equipment ConfigurationFetch Fetch/Write Screen DescriptionS7-300/400 Series Screen Description Screen example of Device Address Configuration Device Address ConfigurationKeypad Simatic S7 Ethernet