Schneider Electric S7 manual Device Address Configuration

Page 20

SIMATIC S7 Ethernet

Device Address Configuration

Overview

WARNING

UNINTENDED EQUIPMENT OPERATION

Read and understand the instructions in this section to ensure data is properly transferred. If you do not follow these instructions, incorrect data could be written to the PLC and the target machine.

Failure to follow these instructions can result in death, serious injury, or equipment damage.

To set up a PLC variable in the Variable List, use the Device Address Keypad from the variable properties.

See Supported Device Addresses.

Note:

zFor information on how to display the Device Address Keypad, see the online help.

Screen example of Device Address Configuration

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Siemens AG Page Table of Contents Page Safety Information Important InformationPlease Note About the Book At a GlanceDocument Scope Validity NoteProduct Related Information User CommentsWhats in this Chapter? Simatic S7 EthernetSubject of this Chapter Connection System StructureOverview Simatic S7 Ethernet Supported Device Addresses Fetch/WriteS7-300/400 Series S7-200 Series Consecutive Equipment Addresses Gap SpanManager Configuration Screen example of I/O Manager ConfigurationEquipment Configuration S7-200 Series Screen DescriptionFetch/Write Screen Description FetchS7-300/400 Series Screen Description Device Address Configuration Screen example of Device Address ConfigurationKeypad Simatic S7 Ethernet
Top Page Image Contents