Menu | General Functions |
|
|
About | Display information about this unit: |
| • Unit model number |
| • Serial number |
| • Battery information |
| •Model number |
| •Installation date |
| •Suggested battery replacement date |
| •UPS firmware version |
Advanced menus
The Advanced menus provide additional options for the UPS and are available only if the display interface is configured to use the Advanced menus.
Menu | General Functions |
|
|
Status | View detailed information about the UPS: |
| • Energy meter |
| • Load current |
| • Status of the Switched Outlet Group |
| • Battery voltage |
| • Operation mode |
| • Efficiency |
|
|
Configuration | Configure advanced settings for the UPS: |
| • Main and Switched Outlet |
| • High and lower transfer points |
| • Sensitivity settings |
| • Date of last battery replacement |
| • Output voltage |
| • Battery settings |
| • Number of battery packs (not available on all models) |
| • Reset energy meter |
| • UPS test settings |
|
|
Control | Control the Main and Switched Outlet Group to turn on, |
| turn off, shutdown, or reboot. |
|
|
Test & Diags | Perform UPS test and diagnostic functions such as user |
| interface testing, battery tests, and battery calibration. |
|
|
Log | View the event and error logs for information about any |
| changes to the UPS and any faults. |
|
|
About | View information about the unit: |
| • Hardware version |
| • Software version |
| • NMC information (if applicable) |
| • SmartSlot Card information (if applicable) |
6 |