Sun Microsystems SunSwiftTM manual Requirements for Using the SBus Adapter, Solaris

Page 12

1

1.2 Requirements for Using the SBus Adapter

Before installing the adapter, make sure your system meets the following hardware and software requirements:

Hardware Requirements

Sun SPARCstation™ systems with an available SBus slot

Software Requirements

Solaris™ 2.4

 

Solaris 2.5 or later Solaris 2.x release

Supported Platforms

Solaris 2.4

 

SPARCstation 5*, SPARCstation 10, SPARCstation 20,

 

SPARCserver™ 1000/1000E,

 

SPARCcenter™ 2000/ 2000E, SPARCserver 6x0MP

 

Solaris 2.5

 

Sun Ultra™ systems, SPARCstation 5*, SPARCstation 10,

 

SPARCstation 20, SPARCserver 1000/1000E,

 

SPARCcenter 2000/2000E, SPARCserver 6x0MP

Firmware

OpenBoot™ PROM Version 2.9 or greater

Peripherals

Only Sun SCSI-2 devices

SCSI Cables

Only standard, Sun-supported cabling to ensure reliable

 

SCSI interface connections

Part Numbers

530-2115-02 (1.2 m 50-pin to 68-pin cable)

 

530-1884-03 (0.8 m 68-pin to 68-pin cable)

 

530-2228-01 (2 m 50-pin to 68-pin cable)

 

530-1885-03 (2 m 68-pin to 68-pin cable)

 

 

*Two SBus adapters maximum.

 

1-2

SunSwift SBus Adapter Installation and User’s GuideJanuary 1996

Image 12
Contents SunSwift SBus Adapter Installation and User’s Guide Network Is the ComputerPlease Recycle Contents Running Diagnostics for Solaris Unix Commands PrefaceTypographic Conventions Shell PromptsRelated Documents Ordering Sun DocumentsSun Welcomes Your Comments FCC Class B Notice-United States SunSwift SBus Adapter Installation and User’s Guide-January Preparing for Installation FeaturesRequirements for Using the SBus Adapter SolarisScsi Cabling SunSwift SBus Adapter Installation and User’s Guide-January Installing the Adapter Performing the InstallationVerifying the Installation Ok show-devsWhere to Proceed Watching Network ActivitySunSwift SBus Adapter Installation and User’s Guide-January Page Preparing for Software Installation For Solaris 2.5 SystemsNet-Install of Solaris 2.4 Over the hme Interface Updating the Solaris 2.4 Archive to Use the hme InterfaceHost File Configuration Using the example in , you will have Booting Booting From the Network Using SolarisDiskless Client Booting for Solaris Type Iommu@f,e0000000/sbus@f,e0001000/hme@3,8c00000 Post-Installation Procedures Optional Using Hubs That Do Not Send Link Pulses2 Configuring Driver Parameters Increasing 100BASE-T PerformanceForcing Network Speed Between 10 Mbps and 100 Mbps Auto-Negotiation SunSwift SBus Adapter Installation and User’s Guide-January Running Diagnostics for Solaris SundiagEditing .usertest File Sundiag WindowRunning Diagnostics for Solaris Starting the Test Interface Signals SunSwift SBus Adapter ConnectorsRJ-45 Connector Signals SCSI-2 Connector Signals Physical Characteristics Power RequirementsSpecifications Performance SpecificationsSunSwift SBus Adapter Installation and User’s Guide-January

SunSwiftTM specifications

Sun Microsystems introduced the SunSwiftTM, a series of advanced networking interfaces and I/O technology designed to enhance the performance of their workstations and servers. SunSwift interfaces were built to address the increasing demand for high-speed data transfer and connectivity in enterprise environments. The architecture was characterized by a focus on achieving higher bandwidth, lower latency, and improved reliability.

One of the main features of SunSwift is its ability to support high-speed data communication through various Ethernet and token ring implementations. The SunSwift cards were designed to be compatible with multiple Sun systems, ensuring wide applicability across different server models. This compatibility allowed users to upgrade their network interfaces without needing to invest in new hardware, promoting cost efficiency and flexibility in network design.

Incorporating the latest advancements in technology, SunSwift leveraged technologies such as PCI (Peripheral Component Interconnect) to enhance data throughput capabilities. The use of PCI enabled the SunSwift to keep pace with the evolving standards of computing, allowing it to handle the demands of modern applications and workloads.

Another key characteristic of SunSwift is its support for network protocols essential for enterprise functionality, including TCP/IP, which provided a robust framework for network communication. The interface achieved high-performance levels while maintaining compatibility with various operating systems, thereby simplifying network management and deployment.

The reliability of SunSwift was further evidenced through advanced error detection and correction mechanisms. This focus on quality ensured that data integrity was preserved, reducing the chances of packet loss during transmission. Additionally, Sun Microsystems incorporated features that facilitated ease of use, such as simple installation processes that required minimal configuration, making SunSwift accessible even to users with limited technical expertise.

Overall, SunSwift represented a significant advancement in network interface technology during its era, showcasing Sun Microsystems' commitment to delivering high-performance solutions that cater to the demands of enterprise networking. Its blend of speed, reliability, and compatibility made it a valuable asset for organizations seeking to enhance their networking infrastructure and support their growing data communication needs. With its innovative features and robust technology, SunSwift played a crucial role in the evolution of networking capabilities within the Sun Microsystems product lineup.