Sun Microsystems SunSwiftTM manual Forcing Network Speed Between 10 Mbps and 100 Mbps

Page 30

3

3.6.4Forcing Network Speed Between 10 Mbps and 100 Mbps

1.At the ok prompt, use the show-devscommand to list the system devices. You should see the full path name of the hme device, similar to the example below:

/iommu@f,e0000000/sbus@f,e0001000/SUNW,hme@3,8c00000

2. Type:

ok nvedit

3.Type the following, pressing the Return key at the end of line 0:

0:probe-all install-console banner

1:apply transfer-speed=10(full path name of the hme device)

4.Press the Control-C keys after typing (full path name of the hme device).

Note – In the above example, the speed is forced to 10 Mbps. To force the speed to 100 Mbps, replace 10 with 100.

5. At the ok prompt type:

ok nvstore

ok setenv use-nvramrc? true

6. Reboot your system.

Refer to the Platform Notes: The hme Fast Ethernet Device Driver document (Part

No: 802-3970) for more information on the hme device driver and forcing network speed. This document is also available on the Solaris 2.5 and the Solaris 2.5: 1/96 AnswerBook.

3-12

SunSwift SBus Adapter Installation and User’s Guide—January 1996

Page 29 Page 31
Image 30
Page 29 Page 31
Contents SunSwift SBus Adapter Installation and User’s Guide Network Is the ComputerPlease Recycle Contents Running Diagnostics for Solaris Unix Commands PrefaceTypographic Conventions Shell PromptsRelated Documents Ordering Sun DocumentsSun Welcomes Your Comments FCC Class B Notice-United States SunSwift SBus Adapter Installation and User’s Guide-January Preparing for Installation FeaturesRequirements for Using the SBus Adapter SolarisScsi Cabling SunSwift SBus Adapter Installation and User’s Guide-January Installing the Adapter Performing the InstallationVerifying the Installation Ok show-devsWhere to Proceed Watching Network ActivitySunSwift SBus Adapter Installation and User’s Guide-January Page Preparing for Software Installation For Solaris 2.5 SystemsNet-Install of Solaris 2.4 Over the hme Interface Updating the Solaris 2.4 Archive to Use the hme InterfaceHost File Configuration Using the example in , you will have Booting Booting From the Network Using SolarisDiskless Client Booting for Solaris Type Iommu@f,e0000000/sbus@f,e0001000/hme@3,8c00000 Post-Installation Procedures Optional Using Hubs That Do Not Send Link Pulses2 Configuring Driver Parameters Increasing 100BASE-T PerformanceForcing Network Speed Between 10 Mbps and 100 Mbps Auto-Negotiation SunSwift SBus Adapter Installation and User’s Guide-January Running Diagnostics for Solaris SundiagEditing .usertest File Sundiag WindowRunning Diagnostics for Solaris Starting the Test Interface Signals SunSwift SBus Adapter ConnectorsRJ-45 Connector Signals SCSI-2 Connector Signals Specifications Physical CharacteristicsPower Requirements Performance SpecificationsSunSwift SBus Adapter Installation and User’s Guide-January

SunSwiftTM specifications

Sun Microsystems introduced the SunSwiftTM, a series of advanced networking interfaces and I/O technology designed to enhance the performance of their workstations and servers. SunSwift interfaces were built to address the increasing demand for high-speed data transfer and connectivity in enterprise environments. The architecture was characterized by a focus on achieving higher bandwidth, lower latency, and improved reliability.

One of the main features of SunSwift is its ability to support high-speed data communication through various Ethernet and token ring implementations. The SunSwift cards were designed to be compatible with multiple Sun systems, ensuring wide applicability across different server models. This compatibility allowed users to upgrade their network interfaces without needing to invest in new hardware, promoting cost efficiency and flexibility in network design.

Incorporating the latest advancements in technology, SunSwift leveraged technologies such as PCI (Peripheral Component Interconnect) to enhance data throughput capabilities. The use of PCI enabled the SunSwift to keep pace with the evolving standards of computing, allowing it to handle the demands of modern applications and workloads.

Another key characteristic of SunSwift is its support for network protocols essential for enterprise functionality, including TCP/IP, which provided a robust framework for network communication. The interface achieved high-performance levels while maintaining compatibility with various operating systems, thereby simplifying network management and deployment.

The reliability of SunSwift was further evidenced through advanced error detection and correction mechanisms. This focus on quality ensured that data integrity was preserved, reducing the chances of packet loss during transmission. Additionally, Sun Microsystems incorporated features that facilitated ease of use, such as simple installation processes that required minimal configuration, making SunSwift accessible even to users with limited technical expertise.

Overall, SunSwift represented a significant advancement in network interface technology during its era, showcasing Sun Microsystems' commitment to delivering high-performance solutions that cater to the demands of enterprise networking. Its blend of speed, reliability, and compatibility made it a valuable asset for organizations seeking to enhance their networking infrastructure and support their growing data communication needs. With its innovative features and robust technology, SunSwift played a crucial role in the evolution of networking capabilities within the Sun Microsystems product lineup.
Top Page Image Contents