Sun Microsystems SunSwiftTM manual Preparing for Software Installation, For Solaris 2.5 Systems

Page 20

3

3.1 Preparing for Software Installation

Note – If the CD-ROM drive that you are using for software installation is attached to a remote machine, refer to your SunOS installation guide for remote CD-ROM access.

For Solaris 2.5 Systems

Some newer systems are pre-loaded with the SunSwift SBus Adapter driver (hme). Before installing the driver from the CD-ROM, perform the following task.

As superuser, check for the hme driver and its revision number by using the modinfo command:

#modinfo grep hme

You should see a line similar to the example below if the driver is already installed:

51 50270000 9f78 7 1 hme (FEPS Ethernet Driver v 1.40)

If the revision number is 1.40 or above, your system already has the SunSwift SBus Adapter driver, and loading from the CD is unnecessary.

If the revision number is below 1.40, or nothing is displayed as a result of the modinfo command, install the software from the CD-ROM that came with the SunSwift SBus Adapter. (See below).

Installing Software From the CD-ROM for Solaris 2.4 and 2.5

Install the software drivers from the CD-ROM that came with the SunSwift SBus Adapter. Refer to the CD-ROM documentation that came with your adapter for driver installation instructions

(Part No: 804-5303-10).

3-2

SunSwift SBus Adapter Installation and User’s GuideJanuary 1996

Image 20
Contents SunSwift SBus Adapter Installation and User’s Guide Network Is the ComputerPlease Recycle Contents Running Diagnostics for Solaris Unix Commands PrefaceTypographic Conventions Shell PromptsRelated Documents Ordering Sun DocumentsSun Welcomes Your Comments FCC Class B Notice-United States SunSwift SBus Adapter Installation and User’s Guide-January Preparing for Installation FeaturesRequirements for Using the SBus Adapter SolarisScsi Cabling SunSwift SBus Adapter Installation and User’s Guide-January Installing the Adapter Performing the InstallationVerifying the Installation Ok show-devsWhere to Proceed Watching Network ActivitySunSwift SBus Adapter Installation and User’s Guide-January Page Preparing for Software Installation For Solaris 2.5 SystemsNet-Install of Solaris 2.4 Over the hme Interface Updating the Solaris 2.4 Archive to Use the hme InterfaceHost File Configuration Using the example in , you will have Booting Booting From the Network Using SolarisDiskless Client Booting for Solaris Type Iommu@f,e0000000/sbus@f,e0001000/hme@3,8c00000 Post-Installation Procedures Optional Using Hubs That Do Not Send Link Pulses2 Configuring Driver Parameters Increasing 100BASE-T PerformanceForcing Network Speed Between 10 Mbps and 100 Mbps Auto-Negotiation SunSwift SBus Adapter Installation and User’s Guide-January Running Diagnostics for Solaris SundiagEditing .usertest File Sundiag WindowRunning Diagnostics for Solaris Starting the Test RJ-45 Connector Signals Interface SignalsSunSwift SBus Adapter Connectors SCSI-2 Connector Signals Physical Characteristics Power RequirementsSpecifications Performance SpecificationsSunSwift SBus Adapter Installation and User’s Guide-January

SunSwiftTM specifications

Sun Microsystems introduced the SunSwiftTM, a series of advanced networking interfaces and I/O technology designed to enhance the performance of their workstations and servers. SunSwift interfaces were built to address the increasing demand for high-speed data transfer and connectivity in enterprise environments. The architecture was characterized by a focus on achieving higher bandwidth, lower latency, and improved reliability.

One of the main features of SunSwift is its ability to support high-speed data communication through various Ethernet and token ring implementations. The SunSwift cards were designed to be compatible with multiple Sun systems, ensuring wide applicability across different server models. This compatibility allowed users to upgrade their network interfaces without needing to invest in new hardware, promoting cost efficiency and flexibility in network design.

Incorporating the latest advancements in technology, SunSwift leveraged technologies such as PCI (Peripheral Component Interconnect) to enhance data throughput capabilities. The use of PCI enabled the SunSwift to keep pace with the evolving standards of computing, allowing it to handle the demands of modern applications and workloads.

Another key characteristic of SunSwift is its support for network protocols essential for enterprise functionality, including TCP/IP, which provided a robust framework for network communication. The interface achieved high-performance levels while maintaining compatibility with various operating systems, thereby simplifying network management and deployment.

The reliability of SunSwift was further evidenced through advanced error detection and correction mechanisms. This focus on quality ensured that data integrity was preserved, reducing the chances of packet loss during transmission. Additionally, Sun Microsystems incorporated features that facilitated ease of use, such as simple installation processes that required minimal configuration, making SunSwift accessible even to users with limited technical expertise.

Overall, SunSwift represented a significant advancement in network interface technology during its era, showcasing Sun Microsystems' commitment to delivering high-performance solutions that cater to the demands of enterprise networking. Its blend of speed, reliability, and compatibility made it a valuable asset for organizations seeking to enhance their networking infrastructure and support their growing data communication needs. With its innovative features and robust technology, SunSwift played a crucial role in the evolution of networking capabilities within the Sun Microsystems product lineup.