Sun Microsystems SunSwiftTM manual Specifications, Physical Characteristics, Power Requirements

Page 39

Specifications

C

 

 

 

 

 

 

 

 

 

C.1 Physical Characteristics

Length

Width

Weight

5.78in. (147.70 mm)

3.3in. (83.82 mm)

4.0oz. (113.40 g)

C.2 Power Requirements

 

 

 

 

 

 

 

Maximum Power Dissipation

9.5

Watt

 

Power Consumption

0.9

Amps @ 5Volts

 

Voltage Tolerance

5V

+/- 5%

 

Ripple

Maximum 100 mV

 

Operational Current

1.9A

 

 

 

 

C.3 Performance Specifications

Maximum Ethernet Transfer Rate

10/100 Mbps

Network Interface

100BASE-TX using Category 5 (data-grade) cable;

 

10BASE-T using Category 3 (voice-grade) cable or

 

better

Ethernet Version

Conforms to IEEE 802.3u

SCSI Interface

20 Mbytes/s, 16-bit single-ended

SBus Clock

16.67 MHz to 25 MHz

SBus Burst Sizes

16/32/64 bytes

SBus Modes

Master/Slave, 64-bit support

SBus Parity

Yes

SBus Version

Conforms to IEEE 1496

 

 

C-1

Image 39
Contents Network Is the Computer SunSwift SBus Adapter Installation and User’s GuidePlease Recycle Contents Running Diagnostics for Solaris Preface Unix CommandsShell Prompts Typographic ConventionsOrdering Sun Documents Related DocumentsSun Welcomes Your Comments FCC Class B Notice-United States SunSwift SBus Adapter Installation and User’s Guide-January Features Preparing for InstallationSolaris Requirements for Using the SBus AdapterScsi Cabling SunSwift SBus Adapter Installation and User’s Guide-January Performing the Installation Installing the AdapterOk show-devs Verifying the InstallationWatching Network Activity Where to ProceedSunSwift SBus Adapter Installation and User’s Guide-January Page For Solaris 2.5 Systems Preparing for Software InstallationUpdating the Solaris 2.4 Archive to Use the hme Interface Net-Install of Solaris 2.4 Over the hme InterfaceHost File Configuration Using the example in , you will have Booting From the Network Using Solaris BootingDiskless Client Booting for Solaris Type Iommu@f,e0000000/sbus@f,e0001000/hme@3,8c00000 Using Hubs That Do Not Send Link Pulses Post-Installation Procedures OptionalIncreasing 100BASE-T Performance 2 Configuring Driver ParametersForcing Network Speed Between 10 Mbps and 100 Mbps Auto-Negotiation SunSwift SBus Adapter Installation and User’s Guide-January Sundiag Running Diagnostics for SolarisSundiag Window Editing .usertest FileRunning Diagnostics for Solaris Starting the Test Interface Signals SunSwift SBus Adapter ConnectorsRJ-45 Connector Signals SCSI-2 Connector Signals Performance Specifications Physical CharacteristicsPower Requirements SpecificationsSunSwift SBus Adapter Installation and User’s Guide-January

SunSwiftTM specifications

Sun Microsystems introduced the SunSwiftTM, a series of advanced networking interfaces and I/O technology designed to enhance the performance of their workstations and servers. SunSwift interfaces were built to address the increasing demand for high-speed data transfer and connectivity in enterprise environments. The architecture was characterized by a focus on achieving higher bandwidth, lower latency, and improved reliability.

One of the main features of SunSwift is its ability to support high-speed data communication through various Ethernet and token ring implementations. The SunSwift cards were designed to be compatible with multiple Sun systems, ensuring wide applicability across different server models. This compatibility allowed users to upgrade their network interfaces without needing to invest in new hardware, promoting cost efficiency and flexibility in network design.

Incorporating the latest advancements in technology, SunSwift leveraged technologies such as PCI (Peripheral Component Interconnect) to enhance data throughput capabilities. The use of PCI enabled the SunSwift to keep pace with the evolving standards of computing, allowing it to handle the demands of modern applications and workloads.

Another key characteristic of SunSwift is its support for network protocols essential for enterprise functionality, including TCP/IP, which provided a robust framework for network communication. The interface achieved high-performance levels while maintaining compatibility with various operating systems, thereby simplifying network management and deployment.

The reliability of SunSwift was further evidenced through advanced error detection and correction mechanisms. This focus on quality ensured that data integrity was preserved, reducing the chances of packet loss during transmission. Additionally, Sun Microsystems incorporated features that facilitated ease of use, such as simple installation processes that required minimal configuration, making SunSwift accessible even to users with limited technical expertise.

Overall, SunSwift represented a significant advancement in network interface technology during its era, showcasing Sun Microsystems' commitment to delivering high-performance solutions that cater to the demands of enterprise networking. Its blend of speed, reliability, and compatibility made it a valuable asset for organizations seeking to enhance their networking infrastructure and support their growing data communication needs. With its innovative features and robust technology, SunSwift played a crucial role in the evolution of networking capabilities within the Sun Microsystems product lineup.