Network Technologies UNIMUXUSBVXHD operation manual Cascading, Cable Connections

Page 42

NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH

CASCADING

The UNIMUX USB Matrix switch can be expanded to access up to 1024 CPUs by cascading multiple units together. As many switches as there are CPU ports may be connected to a UNIMUX USB Matrix switch. (See Figure 41) All downstream switches are referred to as "slaves" in a cascaded system. The only additional hardware required to cascade switches is a set of device and monitor cables for each “SLAVE UNIT” (see MATERIALS on page 2). All CPUs and switches can then be controlled by users using OSD commands with Command Mode.

Limitations

The front panel keypad is only used to operate standalone switches. To control a cascaded network of switches, only the OSD commands within Command Mode will be recognized.

Users connected to accessible ports on downstream slaves (i.e. ports not connected to the master) will not be able to control switches or CPUs connected upstream. Only control over CPUs and slaves downstream from a user's connection point will be enabled. (See Figure 41)

Slaves in a cascaded system must be either all single-user switches or all multi-user switches, but not a combination of both.

Cable Connections

The same cable used to connect a CPU to the UNIMUX is used to connect two UNIMUX-USBV-xHD switches together- HDUSBVEXT-xx-MM. No other cables will be necessary. To connect a slave to a master

1.Connect the USB-A-male end of the HDUSBVEXT-xx-MM to the USER port on the slave.

2.Connect the 15HD male at the same end of the HDUSBVEXT-xx-MM cable to the MONITOR port on the slave.

3.Connect the yellow 15HD male end of the HDUSBVEXT-xx-MM to the CPU 1 port on the master.

Repeat this procedure for each USER and MONITOR port on each slave that is desired to be controlled through the master.

The same procedure can be used to connect multi-user switches (UNIMUX-nXm-UHDU) as slaves (see Figure 42).

Rear View of UNIMUX-USBV-16HDU

Master

16

8 CPU 15

7

14

6 CPU 13

5

12

4 CPU 11

3

10

2 CPU

9

1

MONITOR

RS232

 

250V,2A NETWORK TECHNOLOGIES INCORPORATED

1275 Danner Drive, Aurora Ohio 44202

330-562-7070

www.networktechinc.com

 

 

 

 

 

 

 

Rear View of

 

 

 

Rear View of

 

 

UNIMUX-USBV-16HDU

 

UNIMUX-USBV-16HDU

 

 

Slave

 

 

 

 

Slave

 

 

 

16 8 CPU 15 7 14 6 CPU 13 5

12

4 CPU 11 3 10 2

CPU 9 1

MONITOR

RS232

16 8 CPU 15 7 14 6 CPU 13 5

12

4 CPU 11 3 10 2

CPU 9 1

MONITOR

RS232

 

 

250V,2A NETWORK TECHNOLOGIES INCORPORATED 1275 Danner Drive, Aurora Ohio 44202

330-562-7070

www.networktechinc.com

 

 

 

250V,2A NETWORK TECHNOLOGIES INCORPORATED 1275 Danner Drive, Aurora Ohio 44202

330-562-7070

www.networktechinc.com

 

 

 

HDUSBVEXT-xx-MM

HDUSBVEXT-xx-MM

Figure 41- Cascading with only single-user units

37

Page 41 Page 43
Image 42
Page 41 Page 43
Contents UNIMUX-USBV-xHD Typographic Conventions CopyrightTable of Contents Iii Table of Figures Introduction Types of User Input Devices SupportedMaterials Materials SuppliedMaterials Not Supplied, but Required Features and Functions Additional Features Rack Mounting Instructions To Mount to a RackInstallation Rear View of UNIMUX-USBV-16HDUUSB Type a USB Keyboard Female Connector Rear View of UNIMUX-USBV-16HDU RS232 Connection Rear View of UNIMUX-USBV-16HDULimitations Compatible device combinationsFront Panel Control Using the Unimux USB KVM SwitchBasic Operation Keyboard ControlOSD Control Guidelines for Navigating OSD MenusSecurity Option User Access Functions Command ModeInitial startup Up arrow Settings Administrator’s main menuOSD Settings Find ModeHelp Mode Scan ModeBroadcast Mode Normal ModeF3- Display Information Port information- system structureSecurity Enabling SecurityAdditional OSD Modes Available With Security Enabled User LoginAdministration Menu System Configuration Port ConfigurationUser Configuration Edit User AccountUser Access Control Change Administrator PasswordIdle Timeout OSD Blank TimeoutDisplay Usage Alternate Command Hot Key Reset Port namesSelect Keyboard Language Security Configuration Security ConfigurationSerial Baud Rate Serial AddressMouse Click Equivalents Keyboard MappingKey Equivalents SUN’s 16 Extra KeysSUN USB Keyboard RS232 Control Remote ConnectionWiring Schematic of Matrix-Y-1 cable RS232 Command Protocol RS232 Command Protocol Quick ReferenceAutostatus Main Options Setup OptionsSerTest- RS232 Interface Test Program Matrix OperationsRMTEST-RS232 Interface Test Program Main OptionsCascading Cable ConnectionsOperating Cascaded Switches Rear ViewSUN RAY Support Firmware Upgrade Procedure RequirementsPreparation for Upgrade Preparation for firmware upgradeUpgrade Procedures Start the BootloaderUpdate the User Controller Firmware Update the HID Port Controller FirmwareUpdate the Vendor Specific Port Controller Firmware Device ID 0x001E Device Checksum 0x3AB1 Safety Statements CablesTroubleshooting SpecificationsWarranty Information Index

UNIMUXUSBVXHD specifications

UNIMUXUSBVXHD is a cutting-edge network technology designed to streamline and enhance data management and device connectivity in various applications. This versatile USB matrix switcher supports high-definition video and audio transmission, making it an ideal solution for multimedia environments such as broadcast studios, control rooms, and educational institutions.

One of the main features of the UNIMUXUSBVXHD is its ability to seamlessly switch between multiple USB devices. It supports a variety of high-resolution video formats, including 1080p and 4K, ensuring that users can achieve superior image quality and clarity. With its user-friendly interface, operators can easily manage multiple sources and destinations, simplifying the workflow in complex media setups.

The UNIMUXUSBVXHD utilizes advanced USB over Ethernet technology, allowing users to extend USB signals over long distances without quality degradation. This feature is crucial for applications where devices are located far from the control station, ensuring reliable connectivity and consistent performance.

Another significant characteristic of the UNIMUXUSBVXHD is its compatibility with various operating systems, including Windows, macOS, and Linux, making it a versatile choice for diverse environments. Its plug-and-play functionality eliminates the need for extensive software installations, enabling quick setup and operation.

Moreover, the device features robust security protocols to protect sensitive data during transmission. With built-in encryption and user authentication capabilities, UNIMUXUSBVXHD ensures that only authorized devices can access the network, enhancing overall security in professional settings.

The UNIMUXUSBVXHD also boasts an intuitive control system, offering multiple control options, including remote control, web-based interface, and API integration. This flexibility not only simplifies control procedures but also enables users to automate switching processes, further enhancing efficiency.

In summary, the UNIMUXUSBVXHD is a premier choice for any organization seeking to improve its USB connectivity and data management capabilities. With its high-definition support, long-distance USB transmission, cross-platform compatibility, and advanced security features, it stands out as a reliable and efficient solution in the realm of network technologies. Whether for corporate, educational, or entertainment purposes, the UNIMUXUSBVXHD delivers exceptional performance that meets the demands of modern multimedia applications.
Top Page Image Contents