Network Technologies UNIMUXUSBVXHD operation manual Device ID 0x001E Device Checksum 0x3AB1

Page 50

NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH

Read the Checksum of HID or Vendor Specific Port Controller Firmware

Reading firmware checksum is useful to determine the version of software running on port controllers. While the firmware revision for user controller can be found on the UNIMUX splash screen when it is powered-ON, the firmware revision of port controllers is not displayed anywhere. Reading checksum is an easy way to identify the current firmware revision in your UNIMUX and to determine if a new firmware revision is available for download.

To read the checksum, type <s> for HID port controllers or <t> for vendor specific port controllers, at the bootloader prompt. The following message will be displayed:

Please, type the two-digit number of the port to be checked, <A> to check all or <X> to exit

(the two-digit number should be between 01 and nn, where nn is the number of available ports):

To read the checksum for only one device, type the number of the port (two digits, leading 0). To read the checksum for all ports type <a>.

The device ID and the checksum will be displayed in the following format:

Device ID: 0x001E

Device Checksum: 0x3AB1

The checksums for all revisions of UNIMUX firmware can be found on the NTI download webpage at http://www.networktechinc.com/download/d-srvsw-usbu-hd.html ,

To exit from the bootloader, press <x>.

45

Page 49 Page 51
Image 50
Page 49 Page 51
Contents
UNIMUX-USBV-xHD Typographic Conventions CopyrightTable of Contents Iii Table of Figures Introduction Types of User Input Devices SupportedMaterials Not Supplied, but Required MaterialsMaterials Supplied Features and Functions Additional Features Rack Mounting Instructions To Mount to a RackInstallation Rear View of UNIMUX-USBV-16HDUUSB Type a USB Keyboard Female Connector Rear View of UNIMUX-USBV-16HDU RS232 Connection Rear View of UNIMUX-USBV-16HDULimitations Compatible device combinationsFront Panel Control Using the Unimux USB KVM SwitchBasic Operation Keyboard ControlSecurity Option OSD ControlGuidelines for Navigating OSD Menus Initial startup User Access FunctionsCommand Mode Up arrow Settings Administrator’s main menuOSD Settings Find ModeHelp Mode Scan ModeBroadcast Mode Normal ModeF3- Display Information Port information- system structureSecurity Enabling SecurityAdministration Menu Additional OSD Modes Available With Security EnabledUser Login System Configuration Port ConfigurationUser Configuration Edit User AccountUser Access Control Change Administrator PasswordDisplay Usage Idle TimeoutOSD Blank Timeout Select Keyboard Language Alternate Command Hot KeyReset Port names Security Configuration Security ConfigurationSerial Baud Rate Serial AddressMouse Click Equivalents Keyboard MappingKey Equivalents SUN’s 16 Extra KeysSUN USB Keyboard RS232 Control Remote ConnectionWiring Schematic of Matrix-Y-1 cable RS232 Command Protocol RS232 Command Protocol Quick ReferenceAutostatus Main Options Setup OptionsSerTest- RS232 Interface Test Program Matrix OperationsRMTEST-RS232 Interface Test Program Main OptionsCascading Cable ConnectionsOperating Cascaded Switches Rear ViewSUN RAY Support Firmware Upgrade Procedure Requirements Preparation for Upgrade Preparation for firmware upgradeUpgrade Procedures Start the BootloaderUpdate the User Controller Firmware Update the HID Port Controller FirmwareUpdate the Vendor Specific Port Controller Firmware Device ID 0x001E Device Checksum 0x3AB1 Safety Statements CablesTroubleshooting SpecificationsWarranty Information Index
Top Page Image Contents