NTI UNIMUX
Immediately after powering ON the UNIMUX, the following splash screen will appear on the monitor if the OSD option is built into the switch:
If the security option is enabled (see page 12 for details on the "Security Option"), when the UNIMUX is powered up the user will be prompted for a username and password to continue. If the security option is not enabled the monitor will display the desktop image for the connected CPU and the user can continue with normal operation of the connected CPU.
RS232 Connection
If RS232 control will be used, connect one end of the CAT5 patch cable (supplied) to the port labeled “RS232” on the rear of the UNIMUX. Plug the other end of the CAT5 cable into either the
Rear View of UNIMUX-USBV-16HDU
16 | 8 CPU 15 | 7 | 14 | 6 CPU 13 | 5 | 12 | 4 CPU 11 | 3 | 10 | 2 CPU | 9 | 1 | MONITOR | RS232 |
| ||||||||||||||
250V,2A NETWORK TECHNOLOGIES INCORPORATED | 1275 Danner Drive, Aurora Ohio 44202 | www.networktechinc.com |
|
|
|
|
|
|
|
CAT5 Patch Cable (supplied)Control Terminal
(supplied)
VGA
Monitor
or
Figure 8- Connect cable for RS232 control
9