Network Technologies UNIMUXUSBVXHD operation manual RS232 Control, Remote Connection

Page 36

NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH

RS232 CONTROL

RS232 enables the UNIMUX to be remotely controlled via RS232. To control the UNIMUX via RS232 the user has three options:

•write a program that runs on a PC using the Command Protocol (page 33)

•use the NTI Switch Control Program (page 34) provided on the CD

•use the SerTest or RMTEST programs (pages 34 and 36) provided on the CD

Remote Connection

The RS232 Interface is designed to meet the RS232C standard and can be controlled from any CPU or other controller with an RS232 communications port. The pin-out for the RJ45 connector on the unit is as follows:

RS232 (RJ45) CONNECTOR

PIN

SIGNAL

FUNCTION

1

-

No connection

 

 

 

2

-

No connection

 

 

 

3

RX+

Receive data (TXD at host)

 

 

 

4

GND

Ground

 

 

 

5

-

No connection

 

 

 

6

TX+

Transmit data (RXD at host)

 

 

 

7

-

No connection

 

 

 

8

-

No connection

 

 

 

NOTE: Security must be disabled or user access granted on the port(s) to be selected by RS232 control.

A 5 foot patch cable and two adapters, RJ45-to-DB9 and RJ45-to-DB25, have been provided for connection to most CPUs (see page 9). To daisy chain multiple units, connect a Matrix-Y-1 cable (sold separately) between the CPU and the first switch, and between each switch (as shown in Figure 39).

Baud Rate

The baud rate can be changed using the OSD menu (page 31) or from the RS232 commands (page 33) . The baud rate can be set to 115000, 57600, 38400, 19200, 9600, 4800, 2400, or 1200. A data protocol of 8 data bits, no parity, and 1 stop bit is used for communications.

Unit Address and Loop Back

To allow multiple units to be controlled from a single host port, the RS232 control interface is designed to allow "daisy chaining" up to 15 units using an NTI Matrix-Y-1 cable. Connect the Matrix-Y-1 cable between the RJ45-to-DB9 serial adapter and the CPU as shown in Figure 39. By setting the appropriate unit address (page 31), each unit can be given a unique address (1-15). Then the unit will only respond to commands on the bus if its address is embedded in the command.

31

Page 35 Page 37
Image 36
Page 35 Page 37
Contents UNIMUX-USBV-xHD Typographic Conventions CopyrightTable of Contents Iii Table of Figures Introduction Types of User Input Devices SupportedMaterials Materials SuppliedMaterials Not Supplied, but Required Features and Functions Additional Features Rack Mounting Instructions To Mount to a RackInstallation Rear View of UNIMUX-USBV-16HDUUSB Type a USB Keyboard Female Connector Rear View of UNIMUX-USBV-16HDU RS232 Connection Rear View of UNIMUX-USBV-16HDULimitations Compatible device combinationsUsing the Unimux USB KVM Switch Basic OperationFront Panel Control Keyboard ControlOSD Control Guidelines for Navigating OSD MenusSecurity Option User Access Functions Command ModeInitial startup Up arrow Settings Administrator’s main menuOSD Settings Find ModeHelp Mode Scan ModeBroadcast Mode Normal ModeF3- Display Information Port information- system structureSecurity Enabling SecurityAdditional OSD Modes Available With Security Enabled User LoginAdministration Menu System Configuration Port ConfigurationUser Configuration Edit User AccountUser Access Control Change Administrator PasswordIdle Timeout OSD Blank TimeoutDisplay Usage Alternate Command Hot Key Reset Port namesSelect Keyboard Language Security Configuration Security ConfigurationSerial Baud Rate Serial AddressKeyboard Mapping Key EquivalentsMouse Click Equivalents SUN’s 16 Extra KeysSUN USB Keyboard RS232 Control Remote ConnectionWiring Schematic of Matrix-Y-1 cable RS232 Command Protocol RS232 Command Protocol Quick ReferenceAutostatus Setup Options SerTest- RS232 Interface Test ProgramMain Options Matrix OperationsRMTEST-RS232 Interface Test Program Main OptionsCascading Cable ConnectionsOperating Cascaded Switches Rear ViewSUN RAY Support Firmware Upgrade Procedure RequirementsPreparation for Upgrade Preparation for firmware upgradeUpgrade Procedures Start the BootloaderUpdate the User Controller Firmware Update the HID Port Controller FirmwareUpdate the Vendor Specific Port Controller Firmware Device ID 0x001E Device Checksum 0x3AB1 Safety Statements CablesTroubleshooting SpecificationsWarranty Information Index

UNIMUXUSBVXHD specifications

UNIMUXUSBVXHD is a cutting-edge network technology designed to streamline and enhance data management and device connectivity in various applications. This versatile USB matrix switcher supports high-definition video and audio transmission, making it an ideal solution for multimedia environments such as broadcast studios, control rooms, and educational institutions.

One of the main features of the UNIMUXUSBVXHD is its ability to seamlessly switch between multiple USB devices. It supports a variety of high-resolution video formats, including 1080p and 4K, ensuring that users can achieve superior image quality and clarity. With its user-friendly interface, operators can easily manage multiple sources and destinations, simplifying the workflow in complex media setups.

The UNIMUXUSBVXHD utilizes advanced USB over Ethernet technology, allowing users to extend USB signals over long distances without quality degradation. This feature is crucial for applications where devices are located far from the control station, ensuring reliable connectivity and consistent performance.

Another significant characteristic of the UNIMUXUSBVXHD is its compatibility with various operating systems, including Windows, macOS, and Linux, making it a versatile choice for diverse environments. Its plug-and-play functionality eliminates the need for extensive software installations, enabling quick setup and operation.

Moreover, the device features robust security protocols to protect sensitive data during transmission. With built-in encryption and user authentication capabilities, UNIMUXUSBVXHD ensures that only authorized devices can access the network, enhancing overall security in professional settings.

The UNIMUXUSBVXHD also boasts an intuitive control system, offering multiple control options, including remote control, web-based interface, and API integration. This flexibility not only simplifies control procedures but also enables users to automate switching processes, further enhancing efficiency.

In summary, the UNIMUXUSBVXHD is a premier choice for any organization seeking to improve its USB connectivity and data management capabilities. With its high-definition support, long-distance USB transmission, cross-platform compatibility, and advanced security features, it stands out as a reliable and efficient solution in the realm of network technologies. Whether for corporate, educational, or entertainment purposes, the UNIMUXUSBVXHD delivers exceptional performance that meets the demands of modern multimedia applications.
Top Page Image Contents