NTI RACKMUX Console Drawer with UNIMUX Switch
Once
Figure 4- Administrator Login screen
When a standard user powers up the system a security screen will appear if security has been enabled by the administrator. The user will need to login to the switch by following the instructions below for the USER LOGIN. If the user does not know the appropriate user name and password (setup by the administrator), contact the switch administrator for this information. Once logged-in a user can follow the Command Mode functions described on page 10 to control the switch within the limitations as determined by the administrator.
User Login Mode
User login mode requires a user to login with a user name and password from the list created by the administrator. This mode will also disable use of the front panel until the user logs in.
Function:
Adds a character to the user name/password
Removes previous character from the user name/password
Submit user name/password
Exit USER LOGIN and return to previous mode. This function is only available if security is not currently active.
Keystroke:
(Type any alphabetical or numeric character) | ||
|
Backspace
Enter
Esc
If the password submitted is incorrect, the user will not be able to proceed.
If the password submitted is correct, the user will proceed to Normal Mode.
Figure 5- User Login screen
7