NTI RACKMUX Console Drawer with UNIMUX Switch
Edit user
To enter the Edit User mode press <E> from the User Name List after selecting a user or an empty record.
The Edit User mode (see Fig. 9) enables the administrator to:
-add a new user
-remove an existing user
-edit the settings for an existing user
The Edit User mode contains three edit boxes and a check box list of up to 32 check boxes representing the User Access List (list of the CPU port(s) the user has access rights to).
The first edit box is used to edit the user name. The next two edit boxes are used to input the password twice (in order to verify it was typed correctly). The password can be up to 13 characters in length.
The check boxes are used to control the user access to the CPU ports. The user will only have access to check boxes with checks in them.
The list below describes the functions available in the Edit User mode:
User Access List
Figure 9- Edit the user access list
Function:
Add a character to user name string, password string, or verify password string, whichever is selected
Switch sequentially between the User Name edit box, Password edit box, Verify Password edit box, and User Access List
Keystroke:
or | Shift | |
|
Tab
+ | (Type any upper or lower case |
alphabetical or numeric character) |
Navigate through User Access List when it is active
Toggle access rights (check/ uncheck) of the highlighted port in the User Access List
Save the edited configuration. Administrator will be prompted for a Yes or No confirmation
or
(Spacebar)
Enter | (If Password string and Verify Password string |
are different, this command will have no effect, | |
| enabling the administrator to correct the password) |
Go back to User Name List menu | Esc |
NOTE: To delete a user from the User Name List, use either the <Delete> key or the <Backspace> key to remove characters, not the <Spacebar>. Using the <Spacebar> will overwrite the characters with spaces and retain the user configuration in the User Name List. .
10