NTI RACKMUX Console Drawer with UNIMUX Switch
Search Mode
To enter Search Mode, type any alphabetical or numeric character when the Command Mode menu is on the monitor.
Search Mode enables the user to enter and maneuver through a list of CPU names. The CPU name best matching the characters typed is selected. The list of CPUs may also be searched for a specific (or similar) name. The following commands are valid when the search option has been invoked from Command Mode.
Function:Keystroke:
Erase previous character in search name
Add a character to the search string and select the best matching CPU name
Exit Search Mode, return to Command Mode
Switch to selected port
Backspace
(Type any alphabetical or numeric character) | ||
|
Esc
Enter
Figure 18- Search Mode screen
Maintenance Mode
To enter Maintenance Mode press <Ctrl>+<M> from the Command Mode menu.
Maintenance Mode enables a user to customize the On Screen Display to their requirements.
Function:
Reset all of the port names
Toggle between numeric and alphabetic listing of ports
Move On Screen Display (OSD) menu up on monitor
Move OSD menu down on monitor
Move OSD menu to the right
Keystroke:
R
L
Figure 19- Maintenance Mode screen
Note: After pressing <R> to reset the port names, the switch must be
17