Network Technologies RACKMUX-UW15-4USB, RACKMUX-UW15-8USB, RACKMUX-UW17-4USB, RACKMUX-UW17-8USB

NTI RACKMUX Console Drawer with UNIMUX Switch

RearViewofUNIMUXinRACKMUX-UW15-8USB

R

NTI

1275DannerDr

Aurora,OH44202

www.nti1.com

Tel:330-562-7070

Fax:330-562-1999

CPU8 CPU7 CPU6 CPU5

CPU4 CPU3 CPU2 CPU1

-	+
12VDC
	8	4 VIDEO	7	3	6	2 VIDEO	5	1

NETWORKTECHNOLOGIESINC1275DannerDr,Aurora,OH44202 Tel:330-562-7070 www.nti1.com

CONNECTMASTERCPUPORT2 ONEUSERPORTONSLAVE2

USBVEXT-xx-MM

USBVEXT-xx-MM

CONNECTMASTERCPUPORT1

TOONEUSERPORTONSLAVE1

USER4 USER3 USER2 USER1	R
	NTI

CPU16

	MONITOR3	MONITOR1
R
S	MONITOR4	MONITOR2
2
3
2

SLAVE#2UNIMUX4X16

USER4 USER3 USER2 USER1		R
		NTI
		CPU16
	MONITOR3	MONITOR1
R
S	MONITOR4	MONITOR2
2
3
2

SLAVE#1UNIMUX4X16

Figure 24- Master to slave cable connections- multi-user switches

Limitations

¾All switches used as slaves must have the same number of CPU ports (all 4, 8, or 16 CPU ports).

¾Up to 8 slaves may be connected to form a maximum system size of 152 ports (1x32 port master + 8x16 port slaves).

¾Slaves must be added to the master in order (slave #1 to master’s port 1, slave #2 to master’s port 2, etc).

FYI: Master Port 1 (with an 8-port Slave connected to it) will become ports 1-8 (1-4 for a 4-port slave). Master Unit Port 2 (with a second 8-port Slave Unit connected) will become port numbers 9-16 (5-8 for a 4-port slave).

¾The front panel buttons (found on most UNIMUX switches) are only used to operate standalone switches. To control a cascaded network of switches, only the OSD commands within Command Mode will be recognized.

22