Network Technologies SM-nXm-C5AV-LCD Xtendex Installation, Audio Compatibility, Local Unit

Page 8

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH VIA CAT5

XTENDEX INSTALLATION

(XTENDEX not included)

Audio Compatibility

The audio input of the ST-C5VA-600 Audio/Video Extender is compatible with the following standard CPU audio outputs:

Line out - typically lime green in color

Speaker out- typically orange in color

Headphone out- typically located on the CD-ROM (audio extension cable would be needed)

The audio output of the ST-C5VA-600 Audio/Video Extender is compatible with self-powered stereo speakers.

The Local Unit

1.Plug the cables of the Local Unit into the back of the CPU. (See Fig. 1.)

a)Connect the blue 15HD cable end to the VGA port on the back of the CPU.

b)Connect the black 3.5mm stereo plug into the "line out", "spkr", or "headphones" jack on the back of the CPU or other audio/video source (i.e. VCR, DVD player, etc.).

Notes:

If all 3 jacks are available, use the jack marked "line out".

The "line out" jack is typically lime green and may be marked with this symbol The "spkr" jack is typically orange, and may be marked with this symbol

The "headphones" jack may be marked with this symbol

Figure 1- Connect the Local Unit to the CPU

4

Image 8
Contents SM-nXm-C5AV-LCD Trademark Table of Contents Appendices Introduction MaterialsSupported Web Browsers Materials Supplied with this kitVeemux Features and Functions Default User Name and PasswordsFeatures and Functions Xtendex Features and Functions Xtendex Installation Audio CompatibilityLocal Unit Xtendex not includedConnect Local User Components to Local Unit Remote Unit Connect the Extended Components to the Remote UnitPlug-in and Boot Up Connect the AC adaptersVeemux Installation Attach ST-C5VA-600 Local Unit to VeemuxMaximum total CAT5 cable length cannot exceed 600 feet Using the Veemux Switch Front Panel Interface OverviewConfiguration menu on LCD Keypad ControlSet Serial Address Set Wserver Timeout Command Answer Description RS232 InterfaceNTI Veemux AUDIO/VIDEO Matrix Switch VIA CAT5 Telnet 192.168.1.1 Command Reply DescriptionTelnet Interface Web Interface Web interface WelcomeSwitch Web interface SwitchNTI Veemux AUDIO/VIDEO Matrix Switch VIA CAT5 Setup Pages Web interface SetupVideo Input Names Video Output NamesUpdate Firmware Web interface Update FirmwareHelp Change PasswordUpdate Web Server Logout Web interface LogoutDevice Discovery Tool Device Discovery ToolNull Modem Cables Interconnection Cable Wiring MethodCAT5 Cable Appendix A- Default Settings TroublshootingAppendix Appendix B- General InformationAppendix E- Rack mounting Instructions Appendix D- Product DimensionsSize In. WxDxH Warranty Information Grounding