Sun Microsystems T6320 service manual Using the Ilom Web Interface to Shut Down the Server Module

1. Log in as superuser or equivalent.

TABLE 4-1Poweroff Command Equivalents

			ALOM-CMT
ILOM Web Interface Tabs	ILOM CLI		Compatibility Shell	Server Module Power Button
Remote Control,	->stop	/sys	sc> poweroff -y	Use a paper clip to press the
Remote Power Control,	->stop	-script	/sys	power button for a graceful
Select Action				shutdown.

Depending on the nature of the problem, you might want to view the system status, the log files, or run diagnostics before you shut down the system. For more information, refer to:

■Sun Integrated Lights Out Manager 2.0 Supplement for Sun Blade T6320 Server Modules, 820-2546. This document describes ILOM information specific to the UltraSPARC and the Sun Blade T6320 server module. It also provides command comparisons of the ALOM CMT and ILOM CLI command sets.

■Appendix D of this service manual also provides some information about ILOM.

2.Notify affected users.

Refer to your Solaris system administration documentation for additional information.

3.Save any open files and quit all running programs.

Refer to your application documentation for specific information on these processes.

4.Shut down the Solaris OS using the shutdown (1M)command.

5.Use either the ILOM web interface, or the ILOM CLI, to finish the shut down sequence as described in the following sections.

You can also press the power button on the front of the server module to initiate a graceful shutdown.

4.2.3Using the ILOM Web Interface to Shut Down the Server Module

1.From the ILOM web interface, select the tabs: Remote Control, Remote Power Control (FIGURE 4-1).

In the Select Action menu, choose a shutdown option.

4-4Sun Blade T6320 Server Module Service Manual • June 2009