Paradyne 8620, 8820 manual Summary of Traps 3 Description VarBinds

Page 15

1. Network Management Specification

Table 1-4. Summary of Traps (3 of 7)

Trap

Description

VarBind(s)

hdsl2ShdslPerfSESThresh

This notification indicates that the

hdsl2ShdslEndpointCurr15MinSES,

 

severely errored seconds threshold has

hdsl2ShdslEndpointThreshSES

 

been reached/exceeded for the

 

 

 

HDSL2/SHDSL segment endpoint.

devLastTrapString

 

 

 

hdsl2ShdslPerfCRCanomaliesThresh

This notification indicates that the CRC

hdsl2ShdslEndpointCurr15MinCRCa

 

anomalies threshold has been

nomalies,

 

reached/exceeded for the HDSL2/SHDSL

hdsl2ShdslEndpointThreshCRCanom

 

segment endpoint.

 

alies

 

 

 

 

devLastTrapString

 

 

 

hdsl2ShdslPerfLOSWSThresh

This notification indicates that the LOSW

hdsl2ShdslEndpointCurr15MinLOS

 

seconds threshold has been

WS,

 

reached/exceeded for the HDSL2/SHDSL

hdsl2ShdslEndpointThreshLOSWS

 

segment endpoint.

 

 

 

 

devLastTrapString

 

 

 

hdsl2ShdslPerfUASThresh

This notification indicates that the

hdsl2ShdslEndpointCurr15MinUAS,

 

unavailable seconds threshold has been

hdsl2ShdslEndpointThreshUAS

 

reached/exceeded for the HDSL2/SHDSL

 

 

 

segment endpoint.

devLastTrapString

 

 

 

hdsl2ShdslSpanInvalidNumRepeaters

This notification indicates that a

hdsl2ShdslSpanConfNumRepeaters

 

mismatch has been detected between the

devLastTrapString

 

number of repeater/regenerator units

 

 

 

configuredfor a HDSL2/SHDSL line via

 

 

the hdsl2ShdslSpanConfNumRepeaters

 

 

object and the actual number of

 

 

repeater/regenerator units discovered via

 

 

the EOC.

 

 

 

 

hdsl2ShdslLoopbackFailure

This notification indicates that an

hdsl2ShdslMaintLoopbackConfig

 

endpoint maintenance loopback command

devLastTrapString

 

failed for an HDSL2/SHDSL segment.

 

 

 

 

 

hdsl2ShdslpowerBackoff

This notification indicates that the bit

hdsl2ShdslEndpointCurrStatus

 

setting for powerBackoff in the

devLastTrapString

 

hdsl2ShdslEndpointCurrStatus object for

 

 

 

this endpoint has changed.

 

 

 

 

hdsl2ShdsldeviceFault

This notification indicates that the bit

hdsl2ShdslEndpointCurrStatus

 

setting for deviceFault in the

devLastTrapString

 

hdsl2ShdslEndpointCurrStatus object for

 

 

 

this endpoint has changed.

 

 

 

 

hdsl2ShdsldcContinuityFault

This notification indicates that the bit

hdsl2ShdslEndpointCurrStatus

 

setting for dcContinuityFault in the

devLastTrapString

 

hdsl2ShdslEndpointCurrStatus object for

 

 

 

this endpoint has changed.

 

 

 

 

hdsl2ShdslconfigInitFailure

This notification indicates that the bit

hdsl2ShdslEndpointCurrStatus

 

setting for configInitFailure in the

devLastTrapString

 

hdsl2ShdslEndpointCurrStatus object for

 

 

 

this endpoint has changed.

 

 

 

 

8000-A2-GB30-00

June 2003

9

Image 15
Contents Hotwire 8620 Copyright 2003 Paradyne Corporation All rights reserved Contents Contents June Section Description About This GuideDocument Number Document Title Product-Related DocumentsGranDSLAM 3.0 Network Management Interface Supported RFCs and MIBs 1Name Description Supported RFCs and MIBs 2 IMA MIB Supported RFCs and MIBs 3PDN-ENTITY-REDUNDANCY-MIB Supported RFCs and MIBs 4PDN-DS1EXT-MIB Supported RFCs and MIBs 5Name/Description Other Supported RFCs Used as Guidelines for ImplementationATM-M4 Traps Standards Compliance for Snmp TrapsSummary of Traps 1 Description VarBinds Standard Traps DSX TrapsSummary of Traps 2 Description VarBinds Entity MIB TrapsShdsl MIB Traps Summary of Traps 3 Description VarBinds Summary of Traps 4 Description VarBinds Sonet Linear APS MIB TrapsEnterprise Specific Traps Summary of Traps 5 Description VarBinds Adsl Specific TrapsSummary of Traps 6 Description VarBinds Summary of Traps 7 Description VarBinds IMA TrapsStandards Compliance to Snmp MIBs GranDSLAM Interfaces Management Information Base MIB-II RFC System Group, MIB-II RFCSysDescr Object system SysUpTime Object system SysServices Object systemSysServices Layer L Functionality Value2L-1 Sum SysObjectID Object systemIfIndex scheme Evolution of the Interfaces Group of MIB-II RFCIfNumber Object interfaces IfIndex Object ifEntryGranDSLAM 3.0 Interface List Layer Supported Maximum IfName Interface indexes ifIndex IfDescr Object ifEntry IfIndex AssignmentsInterface IfMtu IfType Object ifEntryIfMtu Object ifEntry IfMtuInterface IfSpeed IfAdminStatus Object ifEntryIfSpeed Object ifEntry IfSpeedIfOperStatus IfAdminStatusInterface IfAdminStatus IfOperStatus Object ifEntryIfLastChange Object ifEntry IfInUncastPkts Object ifEntry 15. ifInUncastPkts Interface IfInUcastPkts Object ifEntry 14. ifInUncastPkts InterfaceIfInDiscards Object ifEntry 16. ifInDiscards Interface IfInErrors Object ifEntry 17. ifInErrors InterfaceETH1 IMA IfOutNUcasts Object ifEntry Interface IfOutUcastPkts Object ifEntry 20. ifOutUcastPkts InterfaceIfOutErrors Object ifEntry Interface IfOutDiscards Object ifEntry 22. ifOutDiscards InterfaceIfOutQLen ifEntry 24. Extension to the Interface Table IfLinkUpDownTrapEnable Object ifXEntryIfSpecific ifEntry Extension to the Intf. Table ifXTable RFCIfStackHigherLayer Object ifStackEntry Interface Stack Group RFCSnmp Group, MIB-II RFC IfStackLowerLayer Object ifStackEntryIfStackStatus Object ifStackEntry Transmission Group, MIB-II RFC 1213 SupportedNetwork Management Specification Physical Layer Adsl MIB RFC 28. Adsl MIB Comments Paradyne DS1-EXT MIB PDN-DS1EXT-MIB Paradyne ReachDSL MIB pdnreachDSL.mib30. ReachDSL MIB Comments DS1 MIB RFC 31. DS1 MIB CommentsPdnDs1ExtConfLineLength RW PdnDs1ExtConfConnector RW32. DS1-EXT MIB Comments PdnDs1ExtConfLineLengthType RWSonetPathCurrentWidth SONET-MIB RFC 33. SONET-MIB CommentsSonetMediumEntry 34. sonetMediumEntry Comments SonetSESthresholdSetDevSonetStatusLastChange DevSonetStatusChangeTrapEnableBy default, this object is enabled DevSonetXmitClkSrc37. Spectrum Management Comments NewSpectrumMgmtGeneralConfigEntry36. Shdsl MIB Comments Spectrum Management pdnspectrummgmt.mibAtmInterfaceMaxVpcs Object atmInterfaceConfEntry ATM Interface Configuration Parameter Group RFCLink Layer ATM AtoM MIB RFC 38. ATM MIB CommentsAtmInterfaceConfVpcs Object atmInterfaceConfEntry AtmInterfaceMaxVccs Object atmInterfaceConfEntry40. atmInterfaceMaxVccs AtmInterfaceMaxVccsAtmInterfaceMaxActiveVciBits AtmInterfaceIlmiVpi AccessAtmInterfaceIlmiVci Access AtmInterfaceMaxActiveVciBits Object atmInterfaceConfEntryAtmInterfaceCurrentMaxVpiBits Object atmInterfaceConfEntry AtmInterfaceMyNeighborIpAddress AccessAtmInterfaceMyNeighborIfName Access AtmInterfaceMyNeighborIfName Object atmInterfaceConfEntryAtmInterfaceSubscrAddress AtmInterfaceTCAlarmState Object atmInterfaceTCEntryAtmInterfaceCurrentMaxVciBits Object atmInterfaceConfEntry AtmInterfaceSubscrAddress Object atmInterfaceConfEntry54. Traffic Descriptor Types AtmServiceCategory Object atmTrafficDescrParamEntryVirtual Channel Link VCL Configuration Group RFC ATM Traffic Descriptor Group RFCAtmVccAal5CpcsTransmitSduSize Object atmVclEntry AtmVclOperStatus Object atmVclEntryAtmVclLastChange Object atmVclEntry AtmVccAalType Object atmVclEntryAtmVcCrossConnectRowStatus Object atmVcCrossConnectEntry Virtual Channel Cross Connect Group RFCTC Adapter Layer Table atmfM4TcAdapterEntry AtmfM4TcAlarmSeverityIndexObject atmfM4TcAdapterEntryAtmfM4MIB- Snmp M4 Network Element View MIB atmfM4MIB 55. Object Supported in ATM Forum MIB TypeAtmfM4IfSubscriberAddress Object atmfM4ATMLayerEntry AtmfM4VcXConnRecover Object atmfM4VcXConnEntry1ATM Cell Layer Table atmfM4ATMLayerEntry AtmfM4IfType Object atmfM4ATMLayerEntry56. Paradyne Extensions to ATM MIBs 1 Sup Object Type Ported 57. ATM Loopback Comments ATM LoopbackGoto tryagain IMA MIB AF-PHY-0086.001 58. IMA MIB Object 59. entPhysicalEntry entPhysicalTable 1 1 Sup Object Syntax Access Status PortedEntity MIB version 2 Objects supported EntityPhysical GroupEntPhysicalDescr 59. entPhysicalEntry entPhysicalTable 1 2 Sup ObjectEntPhysicalIndex 60. entPhysicalIndex Entity CommentsEntPhysicalVendorType 61. entPhysicalDescr Entity Description63. entPhysicalVendorType 1 Entity EntPhysicalVendorType 63. entPhysicalVendorType 2 Entity EntPhysicalVendorType EntPhysicalContainedIn64. entPhysicalContainedIn Entity EntPhysicalContainIn EntPhysicalClass 65. entPhysicalClass Entity EntPhysicalClassEntPhysicalParentRelPos EntPhysicalName 67. entPhysicalName Entity EntPhysicalNameEntPhysicalHardwareRev 69. entPhysicalFirmwareRev 1 Entity EntPhysicalFirmwareRev 68. entPhysicalHardwareRev Entity EntPhysicalHardwareRevEntPhysicalSoftwareRev EntPhysicalFirmwareRevEntPhysicalMfgName 69. entPhysicalFirmwareRev 2 Entity EntPhysicalFirmwareRevEntPhysicalSerialNum 70. entPhysicalSerialNum Entity EntPhysicalSerialNum71. entPhysicalMfgName Entity EntPhysicalMfgName EntPhysicalModelName72. entPhysicalModelName 1 Entity EntPhysicalModelName 72. entPhysicalModelName 2 Entity EntPhysicalModelName EntPhysicalAlias73. entPhysicalAlias Entity EntPhysicalAlias 75. entPhysicalIsFRU 1 Entity EntPhysicalAssetID74. entPhysicalAssetID Entity EntPhysicalAssetID EntPhysicalIsFRUEntLogicalIndex 75. entPhysicalIsFRU 2 Entity EntPhysicalIsFRUEntityLogical Group 76. entLogicalEntry entLogicalTable Sup ObjectEntLogicalContextName EntLogicalTAddressEntLogicalIPDomain EntLogicalContextEngineIDEntityNotifications Group MpeEntPhysicalExtAdminStatusEntPhysicalChildIndex Entity EntPhysicalIndex Semantic EntityGeneral Group81. Entity Sensor MIB Comments EntPhySensorValueUpdateRateMpeEntPhysicalExtOperStatus Entity Sensor MIB RFCIfMauType RO IfMauTable Supporte Object Type AccessIfMauIfIndex RO IfMauIndex ROIfMauTypeListBits RO IfMauDefaultType RWIfMauStatus RO IfMauAutoNegSupported RO84. PDN-MGMT-IP-MIB Object Type Supported PdnMgmtIpPortTablePdnMgmtIpPortIndex NA PdnMgmtBootVci RW PdnMgmtIpConfigMode RWPdnMgmtBootIfIndex RW PdnMgmtBootVpi RWPdnMgmtAtmVci NA PdnMgmtAtmInvArpTablePdnMgmtAtmIfIndex NA PdnMgmtAtmVpi NASnmpEngineTime SnmpEngineBootsSupporting MIBs SNMP-MPD-MIB RFC SnmpEngineIDSnmpUnavailableContexts and snmpUnknownContexts SNMPv1 traps Default valuesSNMPv2 traps Default values SnmpTargetParmsTableStatistics View-based Access Control VacmUser-based Security Model USM RFC Supporting MIBsVacmViewTreeFamilyTable VacmAccessTableVacmContextTable VacmSecurityToGroupTableApsConfigRowStatus Link Fault Management86. pdnLinkFaultMgmtApsSelection Comments ApsConfigModeLink Load Sharing LLS PDN-LINK-LOAD-SHARING-MIB.mib PdnLLSConfigGroupNamePdnLLSConfigSelection 88. pdnLinkFaultMgmtSwitchoverSelection CommentsPdnRedunEntityState PdnRedunCommandPdnRedunAlarmStatus PdnRedunNotificationEnableTiming and Clocking Paradyne mpeConfig MIB mpeConfig.mib 90. mpeDevConfigClockSrcEntry Object Type Access SupportedDevConfigTestTimeout DevDateAndTime RW DevConfigTestDuration92. pdntime.mib Object Type Access Supported Paradyne Time Mib pdntime.mibDevNTPOffsetFromUTC DevNTPEnable RWSysDevUserAccountTable SysDevUserAccountUserPassword RCSysDevUserAccountAccessPartition RC 93. pdndslam.mib Objects Supported TypeDevSecurityMgrValidation RW SecurityMgrSnmpAccess RWParadyne Security MIB pdnSecurity.mib 94. pdnSecurity.mib Object Type SupportedSecurityMgrRowStatus RW SecurityMgrTelnetAccessRWSecurityMgrFtpAccess RW SecurityMgrTrapAccess RWMpeDevFileXferFileType3 MpeDevFileXferConfigTable 95. mpeControl.mib 2 Object Type SupportedMpeDevControlTable MpeDevFirmwareControlTable PdnSyslogPort RW PdnSyslogStatus RWPdnSyslogIPAddr RW PdnSyslogLevelPdnEntitySyslogNumber NA PdnSyslogSeverityThreshold RWPdnSyslogRemoteDaemon RW PdnEntitySyslogTable NA97. Health and Status MIB Comments Traps PdnDevConfigTrapsEnable RW pdnTrapMgr.mibPdnSyslogRateLimiting RW Paradyne Health and Status MIB mpeHealthAndStatus.mib98. devLastTrapString 2 DevLastTrapString DSX Traps Adsl Specific Traps 98. devLastTrapString 3 DevLastTrapString98. devLastTrapString 4 DevLastTrapString IMA Traps Network Management Specification June Index IN-2 IN-3 IN-4
Related manuals
Manual 58 pages 27.69 Kb Manual 108 pages 33.36 Kb

8620, 8820 specifications

The Paradyne 8620 and Hotwire 8620 GranDSLAM are advanced DSLAM devices designed to provide high-speed broadband access over existing copper lines. This installation guide will outline the main features, technologies, and characteristics of these powerful units.

The Paradyne 8620 is engineered to support various DSL technologies, including ADSL, ADSL2+, and VDSL. This versatility allows operators to deploy services tailored to the needs of their customers, enabling data rates of up to 50 Mbps downstream, making it an ideal choice for meeting increasing bandwidth demands. The Hotwire 8620 GranDSLAM shares many similarities, focusing on providing enhanced service delivery for both residential and business users.

One of the key features of the GranDSLAM series is its modular architecture. Both models support up to 48 subscriber line interfaces in a single chassis, which provides significant scalability. Operators can seamlessly increase capacity by adding additional cards to accommodate growth. The devices are designed for easy deployment and management, equipped with an intuitive web-based interface that simplifies configuration and monitoring tasks.

Both units also feature advanced management capabilities, including support for SNMP and TR-069 protocols. This allows service providers to manage and provision devices remotely, significantly reducing operational costs and improving service reliability. The GranDSLAM models can also provide detailed diagnostic information, helping operators quickly identify and troubleshoot issues.

The Paradyne and Hotwire series ensure interoperability with various customer premises equipment, enabling service providers to offer bundled services such as voice, video, and data over the same connection. This capability is enhanced by the units’ ability to support VLANs and QoS features, ensuring that high-priority traffic receives the necessary bandwidth.

In addition to performance, the 8620 series is built with energy efficiency in mind. By utilizing power-saving features, these units help reduce overall operational costs while still providing reliable service.

Overall, the Paradyne 8620 and Hotwire 8620 GranDSLAM are robust solutions for service providers looking to deliver high-speed broadband services. Their modular design, advanced management capabilities, and support for multiple DSL technologies make them an excellent choice for today’s demanding telecommunications environment. With these advantages, operators can effectively meet customer needs while preparing for future growth and technology advancements.