Paradyne 8620, 8820 EntPhysicalChildIndex Entity EntPhysicalIndex Semantic, EntityGeneral Group

1. Network Management Specification

Table 1-79.	entPhysicalChildIndex
Entity		entPhysicalIndex	entPhysicalChildIndex	Semantic
Chassis		0001000000	0001ss0000	A chassis contains ’ss’ containers, ss=[1..20].
			0001ss010x	A chassis contains a sensor ’x’, x=[1..3].
			0001ss011x	A chassis contains a fan “x”, x=[1..1]
			0001ss013x	A chassis contains a powersupply “x”, x=[1..2]
Container		0001ss0000	0001ss000y	A container ’ss’ contains module ’y’, ss=[1..20],
				y=[1..3]
Module		0001ss0001	0001ss1yyy	A module (e.g portcard) contains up to 24 DSL
				ports, where yyy=[1..24]
			0001ss1801	A module entity contains a console port.
			0001001802	A module entity contains a ethernet management
				port.
			0001ss0121	A module entity contains a Mgmt Plane PLD

7.1.2.5entityGeneral Group.

This group will be supported as specified in RFC 2737.

7.1.2.6entityNotifications Group

An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. This trap will be generated as specified in the RFC 2737.

7.2Paradyne Entity MIB extension (mpe_dslam.mib)

The following MIB table will extend the entityMIB (RFC 2737).

Table 1-80. Paradyne Entity MIB Extension

Table	Comments
mpeEntPhysicalExtEntry	Supported as is

The following subsections highlights special cases and/or limitations on the support of some objects in this table.

7.2.1mpeEntPhysicalExtAdminStatus

This object allows managers to set the administrative status of each entity. All the entities dynamically discovered by the device will have an adminstatus set to ’up’ by default. This object will be supported read-only.

8000-A2-GB30-00 June 2003 69