Paradyne 8820, 8620 manual entPhysicalMfgName Entity EntPhysicalMfgName, EntPhysicalModelName

1. Network Management Specification

The following table shows the entPhysicalMfgName designated for the entities.

Table 1-71. entPhysicalMfgName

Entity	entPhysicalMfgName
Chassis	“Paradyne”
Container	"Paradyne"
Module	“Paradyne”
Splitter card	“Paradyne”
DSL Port	“A String reflecting the DSP Manufacturer”
T1/E1 port	“Paradyne”
OC3 port	“Paradyne”
Console port	“Paradyne”
Ethernet Mgmt port	“Paradyne”
Temp Sensor	“Paradyne”
Fan	“Paradyne”
Management Plane PLD	“Paradyne”
Led PLD	“Paradyne”
T1/E1 PLD	“Paradyne”

7.1.2.1.13entPhysicalModelName

The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself. If the model name string associated with the physical component is unknown to the agent, then this object will contain a zero-length string.

Valid Object Value(s):

The following table shows the entPhysicalModelName designated for the entities..

Table 1-72. entPhysicalModelName (1 of 2)

Entity	entPhysicalModelName
Chassis	zero-length-string
Container	zero-length-string
Module	A String describing the Model Number of the Module
Splitter card	A String describing the Model Number of the Splitter Card
DSL Port	zero-length-string
T1/E1 port	zero-length-string
OC3 port	zero-length-string
Console port	zero-length-string

64 June 2003 8000-A2-GB30-00