Paradyne 5620 Power-On, Alarm red, Digital Subscriber Line green Ethernet Link green

Page 10

3.Insert the power cord's round end into the jack labeled POWER. Plug the transformer into an ac outlet.

Hotwire RTU

Power

Jack

Transformer

98-15836

The RTU hardware installation is now complete. When the power cord is installed, the RTU goes through a power-on self-test.

Power-On

When power is applied, the RTU performs self-diagnostics and the PWR LED is on. The self-diagnostics includes a power-on self-test. During the power-on self-test, all of the LEDs turn on for one second.

Power – green

Alarm – red

Test – yellow

Digital Subscriber Line – green

Ethernet Link – green

PWR ALM TST

DSL

ETHERNET

5620

98-15835

Refer to Troubleshooting, page 13, for LED indications requiring action.

Image 10

Contents Before You Begin Wiring and Cables NeededDocument Number Document Title Package Checklist What Does the Hotwire 5620 RTU Do?DSL Access with a Hotwire 5030 or 5038 Pots Splitter Network Service Provider DSL Access with a Hotwire 5038 Distributed Pots SplitterCustomer Premises CP DSL Access without a Pots Splitter Procedure Installing the DSL Access WiringPunchdown Block Telephone Network Interface Device NID DSL/POTSRJ11 Wall Jack Hotwire RTU Installing the Hotwire 5620 RTUPots Splitter Ethernet Line Alarm red Power-OnDigital Subscriber Line green Ethernet Link green Optional RTU Wall Placement RTU Hardware Template Status LEDs TroubleshootingLED Symptom Action Condition StatusIncreasing the Number of End-User Systems Cables & ConnectorsPin # Function Ethernet Cable Pin Straight-Through ConnectionPin Ethernet Crossover Cable Function Pin # Pin # Function Model 5620 RTU Technical Specifications SpecificationImportant Safety Instructions Declaration of Conformity Japan CE MarkingCanada EMI Warnings Document Feedback Warranty, Sales, Service, and Training InformationTrademarks