The Hotwire 5620 RTU connects to the local loop via wiring from the demarcation point to an RJ11 wall jack. The DSL
Demarcation Point
Central
Office
POTS/DSL
Local Loop
Punchdown
Block or NID
Customer Premises |
DSL |
Wiring |
DSL |
RJ11 |
Jack |
RTU |
"Procedure
1.Wiring can be run from the punchdown block or NID to a new or existing wall jack. Match the pair colors on both ends.
2.Label the DSL jack.
3.Reconnect the DSL access pair at the punchdown block or NID. Tighten both terminal screws with a
RJ11 Wall Jack
or
The RJ11
7