Paradyne 5620 installation instructions Ethernet Line

Page 9

2.Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable into the jack labeled ETHERNET.

H Use a straight-through cable and connect the other end to an Ethernet hub, or

Hotwire RTU

Ethernet

Line

POWER

ETHERNET

DSL

Ethernet

HubEthernet

Cable

97-15303-01

HUse an Ethernet crossover cable and connect the other end to the Ethernet Network Interface Card (NIC) in the PC.

Hotwire RTU

Ethernet

Line

POWER

PC with Ethernet Network Interface

CardEthernet Cable

ETHERNET

DSL

97-15303b

For RTU cable pin assignments, refer to Cables & Connectors, page 14.

9

Image 9

Contents Wiring and Cables Needed Before You BeginDocument Number Document Title What Does the Hotwire 5620 RTU Do? Package ChecklistDSL Access with a Hotwire 5030 or 5038 Pots Splitter DSL Access with a Hotwire 5038 Distributed Pots Splitter Network Service ProviderCustomer Premises CP DSL Access without a Pots Splitter Installing the DSL Access Wiring ProcedurePunchdown Block DSL/POTS Telephone Network Interface Device NIDRJ11 Wall Jack Installing the Hotwire 5620 RTU Hotwire RTUPots Splitter Ethernet Line Power-On Alarm redDigital Subscriber Line green Ethernet Link green Optional RTU Wall Placement RTU Hardware Template LED Symptom Action TroubleshootingStatus LEDs Condition StatusCables & Connectors Increasing the Number of End-User SystemsPin # Function Pin Straight-Through Connection Ethernet CablePin Ethernet Crossover Cable Function Pin # Pin # Function Specification Model 5620 RTU Technical SpecificationsImportant Safety Instructions Japan CE Marking Declaration of ConformityCanada EMI Warnings Warranty, Sales, Service, and Training Information Document FeedbackTrademarks