Paradyne 5620 installation instructions Optional RTU Wall Placement, Procedure

Page 11

Optional RTU Wall Placement

The Hotwire 5620 RTU is designed for tabletop placement. The RTU can also be mounted on a wall. To mount an RTU, you will need:

-Three slotted-head #6 self-threading screws with molly bolts

-Drill and 3/16″ drill bit for the molly bolts

-Screwdriver

A template with the dimensions for the three screws is provided. See RTU Hardware Template on page 12.

"Procedure

To mount the RTU:

1.Use a drill to install the plastic anchors (molly bolts).

2.Use a screwdriver to install the screws. Do not install the screws flush with the wall. Leave enough clearance to hang the RTU housing from the screws.

Wall

Fasteners

Hotwire

RTU

98-16170

11

Image 11

Contents Document Number Document Title Wiring and Cables NeededBefore You Begin DSL Access with a Hotwire 5030 or 5038 Pots Splitter What Does the Hotwire 5620 RTU Do?Package Checklist Customer Premises CP DSL Access with a Hotwire 5038 Distributed Pots SplitterNetwork Service Provider DSL Access without a Pots Splitter Punchdown Block Installing the DSL Access WiringProcedure DSL/POTS Telephone Network Interface Device NIDRJ11 Wall Jack Pots Splitter Installing the Hotwire 5620 RTU Hotwire RTU Ethernet Line Digital Subscriber Line green Ethernet Link green Power-OnAlarm red Optional RTU Wall Placement RTU Hardware Template Condition Status TroubleshootingLED Symptom Action Status LEDsPin # Function Cables & ConnectorsIncreasing the Number of End-User Systems Pin Ethernet Crossover Cable Function Pin # Pin # Function Pin Straight-Through ConnectionEthernet Cable Specification Model 5620 RTU Technical SpecificationsImportant Safety Instructions Japan CE Marking Declaration of ConformityCanada EMI Warnings Trademarks Warranty, Sales, Service, and Training InformationDocument Feedback