Paradyne 6310 MVLt Before You Begin, Wiring and Cables You Need, MVL Phone Filter

NOTES:

In this document:

—A telephone is used to represent any equipment that plugs into a phone jack and uses the POTS line, such as a phone, modem, or fax machine.

—End-user system is used to represent any PC with an Ethernet connection and MVL-based service.

—Service provider is used to represent any Internet Service Provider (ISP) or remote LAN access provider.

Before You Begin

Verify that your package contains the following:

-Hotwire 6310 MVL Modem

-MVL interface cable with RJ11 connectors

-Power cord with power transformer

-One ferrite choke

Be sure to register your warranty at www.paradyne.com/warranty.

Wiring and Cables You Need

The following wiring and standard connectors are used with this product:

-Standard RJ11 wall jack for the MVL cabling.

-Standard Ethernet 8-pin, non-keyed modular plug for a PC or workstation.

An Ethernet straight-through or crossover cable is used. Refer to Installing the Hotwire 6310 MVL Modem on page 4 for Ethernet cable details.

MVL Phone Filter

Depending on the type of telephone handset and the quality of the home or business wiring, a phone filter is recommended to improve data transmission throughput and minimize background noise during a telephone conversation.

There are two Hotwire MVL Phone Filters:

HHotwire 6035 MVL Phone Filter designed for use with a tabletop phone.

HHotwire 6040 MVL Wall Jack Phone Filter designed for use with a wall phone.

3