Paradyne 6310 MVLt installation instructions Power-On, Alarm red

Page 7

The MVL modem hardware installation is now complete. When the power cord is installed, the MVL modem goes through a power-on self-test.

Power-On

When power is applied, the MVL modem performs self-diagnostics and the PWR LED is on. The self-diagnostics includes a power-on self-test and all of the LEDs turn on for one second.

Power – green

Alarm – red

Test – yellow

Multiple Virtual Lines – green

Transmit/Receive – green

Ethernet Link – green

	PWR ALM TST	LINE TX/RX	ETHERNET
	MVL
	TM MODEM

99-15896-01

Refer to Troubleshooting on page 8 for LED indications requiring action.

7

Image 7

Contents Hotwire 6310 MVL Modem Overview ContentsCustomer Premises CP Hotwire MVL SystemMVL Access with a Hotwire MVL Pots Filter ServiceBefore You Begin Wiring and Cables You NeedMVL Phone Filter Document Number Document Title Installing the Hotwire 6310 MVL ModemProcedure Product-Related DocumentsExisting Cable PC with Ethernet Network Interface CardEthernet Cable Alarm red Power-OnState Status TroubleshootingLED Symptom Action Status LEDsMVL HomeLink Increasing the Number of End-User Systems Cables & ConnectorsPin # Function Ethernet Cable Pin Straight-Through ConnectionPin Ethernet Crossover Cable Function Pin # Pin # Function Optional MVL Modem Wall Placement MVL Modem Hardware Template Specification Hotwire 6310 MVL Modem Technical SpecificationsImportant Safety Instructions Canada EMI Warnings CE MarkingJapan Declaration of Conformity Government RequirementsUnited States Notice to Users of the Telephone Network Page Patent Notification Warranty, Sales, Service, and Training InformationDocument Feedback Trademarks