Paradyne 6310 MVLt installation instructions Existing Cable

Page 5

3.Connect a telephone (optional); go to Step 4 if you are not connecting a telephone to the MVL modem.

The 6035 phone filter has a cable attached. Plug the other end of this cable into the MVL modem jack labeled PHONE. Using the existing telephone interface cable that was unplugged in Step 1, plug into the POTS filter jack labeled PHONE.

MVL Modem

Existing Cable

POWER

ETHERNET	P
	HO
	NE
	LI
	NE

Supplied

LINE	Cable

PHONE

99-16239-01

4.Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable into the jack labeled ETHERNET.

HUse a straight-through cable and connect the other end to an Ethernet hub. Do not connect a straight-through cable to the external hub’s UPLINK connection (this connection requires a crossover cable),

MVL Modem

Ethernet

Line

POWER

ETHERNET

Ethernet

HubEthernet

Cable

PHONE LINE

98-15906

– or –

5

Image 5

Contents Hotwire 6310 MVL Modem Overview ContentsMVL Access with a Hotwire MVL Pots Filter Hotwire MVL SystemService Customer Premises CPMVL Phone Filter Wiring and Cables You NeedBefore You Begin Procedure Installing the Hotwire 6310 MVL ModemProduct-Related Documents Document Number Document TitleExisting Cable PC with Ethernet Network Interface CardEthernet Cable Alarm red Power-OnLED Symptom Action TroubleshootingStatus LEDs State StatusMVL HomeLink Pin # Function Cables & ConnectorsIncreasing the Number of End-User Systems Pin Ethernet Crossover Cable Function Pin # Pin # Function Pin Straight-Through ConnectionEthernet Cable Optional MVL Modem Wall Placement MVL Modem Hardware Template Specification Hotwire 6310 MVL Modem Technical SpecificationsImportant Safety Instructions Japan CE MarkingCanada EMI Warnings Declaration of Conformity Government RequirementsUnited States Notice to Users of the Telephone Network Page Document Feedback Warranty, Sales, Service, and Training InformationTrademarks Patent Notification