MAINTENANCE AND TROUBLESHOOTmNG
inspect and tighten aHparts of the eHiptbaUcrosstrainer
reguUarUy,RepUaceany worn parts immediateUy,
Toclean the eHiptbaU crosstrainer, use adamp cloth
and a small amount of mild soap, Important: To
avoid damage to the console, keep liquids away
from the console and keep the consote out of
direct sunlight.
BATTERY REPLACEMENT
if the consob dispUaysbecome dim, the batteries
shouUdbe repUaced; most consob probbms are the
resuUtof bw batteries, See assemMy step 5 on page
7 for repUacement instructions,
HOW TO LEVEL THE ELLIPTICAL CROSSTRAINER
After the elliptical
crosstrainer has
been moved to
the location
where it wiii be
used, make sure
that the ends of
both stabilizers
are touching the
floor, if the ellipti°
cal crosstrainer
rocks slightly during use, turn one or both of the level-
ing feet under the front stabilizer until the rocking
motion is eliminated,
HANDGRIP PULSE SENSOR TROUBLESHOOTING
Avoid moving your hands while using the handgrip
pulse sensor, Excessive movement may interfere
with heart rate readings,
Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings,
For the most accurate heart rate reading, hold the
metal contacts for about 30 seconds,
For optimal performance of the handgrip pulse sen-
sor, keep the metal contacts clean, The contacts
can be cleaned with a soft cloth--never use alcohol,
abrasives, or chemicals,
2O