5.9.2 Delete Encapsulation
To delete encapsulation, select a VCC entry and then click on the Delete Encap button.
5.9.3 Add a VCC
To add a VCC entry, complete the following steps.
STEP 1: Click on the Add VCC button. The VCC screen appears.
STEP 2: Enter values for the parameters (explained below).
STEP 3: Click on the Apply button at the bottom of the page.
VPI | Virtual Path Identifier (VPI) that identifies this ATM |
| connection. The valid range is 0 to 4095. |
|
|
VCI | Virtual Channel Identifier (VCI) that identifies this ATM |
| connection. The valid range is 0 to 65,535. |
|
|
Peak Cell rate | Defines the fastest rate a user can send cells to the |
(cells/sec) | network. It is expressed in cells per second. |
|
|
Average Cell rate | Defines the maximum sustainable average rate a user can |
(cells/sec) | send cells to the network. It is expressed in cells per |
| second. This specifies the bandwidth utilization. This value |
| must always be less than or equal to the Peak Cell Rate. |
|
|
Burst size (cells) | Maximum number of cells the user can send at the peak |
| rate in a burst, within a sustainable rate. |
|
|
CDVT (cells) | Constrains the number of cells the user can send to the |
| network at the maximum line rate. |
|
|
Type | Select data or voice |
|
|
62 | July 2004 |